Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

720 transmission gear patterns

Welcome Guest, Log in or Register
Author 
Markus

03-24-2005 06:43:46




Report to Moderator

Hi, my 720 LP has serial number 7206XXX. It has a weird shift pattern with 2nd gear on top of R. Then 1 across from R, with 3 on the bottom left side of the quadrant.

On the right side, I have 5 on top, then 4, then 6 on bottom.

All others I have seen have 1, R, 2, 4, on the left, with 3,5,6, on the right....

Why is this? Are tranny parts from these two types of transmissions interchangeable?

[Log in to Reply]   [No Email]
Poor Farm Jim

03-24-2005 09:48:39




Report to Moderator
 Re: 720 transmission gear patterns in reply to Markus, 03-24-2005 06:43:46  
Markus,

That's the opional high speed transmission for your tractor. It basically gets rid of the creeper 1st gear and adds a new high speed 5th,the rest of the gears then have to be re-numbered with 6th remaining 6th. From my observation a disproporionately high number of 720 LP's have them. Most of the transmission parts are the same, save for a couple gears on the left side of the case. Hope this helps.

P.F.Jim

[Log in to Reply]  [No Email]
Poor Farm Jim

03-24-2005 10:03:06




Report to Moderator
 Re: 720 transmission gear patterns in reply to Poor Farm Jim, 03-24-2005 09:48:39  
Markus,

I might add that with your serial number of 7206XXX that transmission and shift quadrant was a retro fit, as the high speed transmission didn't become a factory installed option till a while after the black dashes came out at serial #7214900. I have a green dash 720 LP also #72022XX that has the high speed transmission installed but the shift quadrant has only the R and 6 cast in (no the others were not ground off). I've heard of this being the case with other tractors, also.

P.F.Jim

[Log in to Reply]  [No Email]
Markus

03-24-2005 10:17:13




Report to Moderator
 Re: 720 transmission gear patterns in reply to Poor Farm Jim, 03-24-2005 10:03:06  
PF Jim,
Yep your right, there are only 2 numbers on the gear shift quadrant.....
Why would a person have wanted to go faster in 5th gear? 8 mph? Wouldnt 5th already be close to 8 mph?
Also, is the creeper gear first gear? You would be sayuing I dont have creeper gear, so I guess this tractor wont go as slow as a normal 720 would?
Does this make the tractor any more special? Came from Far West Texas....

[Log in to Reply]  [No Email]
Poor Farm Jim

03-24-2005 10:55:03




Report to Moderator
 Re: 720 transmission gear patterns in reply to Markus, 03-24-2005 10:17:13  
Marcus,

The normal 5th gear was about 5 1/2 MPH. The new 8 1/3 MPH 5th would be very handy for rotary hoeing or harrowing or for pulling a really heavy load on the road. Yes, by creeper gear I meant the normal 1st gear, 1 1/3 MPH, and yes you are loosing that; the normal 2nd gear, 2 1/4 MPH, is now your new 1st, and on up till the new 5th. My 720 LP came out of Oklahoma, before that ???? One of the other 720 LP's that I alluded to with high speed transmission came from Oklahoma, too. I don't know that they are very special, I have no idea what percent of tractors - 720 & 730 - have this option but it would be in the 10-20 per cent range I would guess, less on the green dash tractors like ours where it had to be retro fitted. It might make them a few dollars more, I know I sure like it and am glad to have a 720 with it.

P.F.Jim

[Log in to Reply]  [No Email]
Mike M

03-24-2005 09:39:29




Report to Moderator
 Re: 720 transmission gear patterns in reply to Markus, 03-24-2005 06:43:46  
They offered two tranny's in those. A real close look through the parts book should answer the interchange question.



[Log in to Reply]  [No Email]
Chuck in Ks.

03-24-2005 07:11:49




Report to Moderator
 Re: 720 transmission gear patterns in reply to Markus, 03-24-2005 06:43:46  
If you will check the archives you will find that question has been asked before. Several people on this site may be able to answer your question, but I think (my memory and reality sometimes differ) it was Clooney who answered your questions.
I keep hard copies on a lot of 720 info, if you can't find your answers post back and I will look through my copies to see if have that post.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy