Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Boy did I open a can of worms!!

Welcome Guest, Log in or Register
Author 
maddog

02-25-2005 07:47:14




Report to Moderator

I worded the question wrong. Sure there are tractors that out pull a 4020. I wasnt talking about a tractor pull. Sure there are tractors with nice cabs, better hydraulics, 4wd. 1st. How many of these new computerized tractors will be on the job starting EVERY day and feeding or cleaning 40 years from now? How many tractors period, will still be in everyday use in 40 years? Lots of good tractors have been built, many had state of art things on them. How many where replaced in a few years by something better? In my travels, I have not seen one model of tractor 40 years old still on as many farms still being used to farm as the 4020. Not in some parade or fancy tractor pull, But Still feeding cows, moving manure,raking hay,grinding feed, and so on. I own many colors of tractors, The question was what other tractor has held up as well, put in the hours, and still been usefull for everyday farming as the 4020. Each color of tractor had its one that was their benchmark. Dont look for falts with the 4020, find what was good with someone elses brand and model.

[Log in to Reply]   [No Email]
Jeff 2030

02-27-2005 04:42:36




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to maddog, 02-25-2005 07:47:14  
How about the little guy, The ford N series from 39 to 52 ,still see a lot of those guys running around , they were not big, but beat the hell out of walking behind a horse.



[Log in to Reply]  [No Email]
Loren NC

02-25-2005 12:27:29




Report to Moderator
 What about Allis? in reply to maddog, 02-25-2005 07:47:14  
The volume of Allis Chalmers was probably never as great as the I-H 'M' but think about what they had early on: second clutch, live power, three point (their own version), etc. I would put Allis WD and WD45 on the list. They were and are still work horses, small but hardy.



[Log in to Reply]  [No Email]
G/MAN

02-25-2005 10:55:31




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to maddog, 02-25-2005 07:47:14  
Don't sweat it. The 4020 was, is and always will be legendary in tractor history. Sure, there were other tractors that could probably pull more. And there might have been a few features on others that were better, but from front to back and top to bottom, taking into consideration performance, comfort and everything else, the 4020 couldn't be touched. And farmers acknowledged that by buying them in huge quantities.

[Log in to Reply]  [No Email]
Mike M

02-25-2005 10:10:44




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to maddog, 02-25-2005 07:47:14  
Those 4020's are something special.How many things are made that you could of bought one new worked it many many hours wrote it off on your taxes and then sell it for over twice what you paid for it. I can't name anything else unless you add a 3020 ,2520,4000 they do good too ! I still see many Farmalls H & M's running around doing odd jobs. Not as many JD A & B's I think more of the JD's are just in collections.

[Log in to Reply]  [No Email]
RustyFarmall

02-25-2005 09:11:54




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to maddog, 02-25-2005 07:47:14  
Definately the 4020 will go down in history as one of the great classics, no arguments from me on that one. I probably have more seat time on 4010s,4020s, and 3020s than on any other tractor. Having said that I also will add that in the last few years I am seeing just as many Farmall Hs and Ms still working as 4020s. Would you believe that even as I write this my old John Deere cap is in the wash? Thought maybe I should clean it up a bit so that I can come in here and pick on you guys once in a while.

[Log in to Reply]  [No Email]
Jak

02-25-2005 09:22:07




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to RustyFarmall, 02-25-2005 09:11:54  
There is an M Farmall hooked to an auger that I see every afternoon going home.It gets used all the time.



[Log in to Reply]  [No Email]
Indydirtfarmer

02-25-2005 09:08:22




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to maddog, 02-25-2005 07:47:14  
Think about it.... Why would someone post on a John Deere message board that DISLIKES John Deere UNLESS their goal was to start trouble. You get these goofballs that badmouth what they know everyone else likes all the time. Their comments aren't valid. They aren't even their REAL thoughts. Like I said, they're just here to start trouble. That's what jeleousy does to some people.

Also, look at how ridiculous their comments are.... Not one valid point amongst them.

[Log in to Reply]  [No Email]
mike

02-25-2005 08:22:26




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to maddog, 02-25-2005 07:47:14  
20 yrs from now they are still going to be asking" why did deere only produce the 4960 for 3 yrs?" 4960 MFWD will go down as one of deere's greatest tractors



[Log in to Reply]  [No Email]
Allan in NE

02-25-2005 08:16:38




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to maddog, 02-25-2005 07:47:14  
MD,

'Taint no can of worms; it is a discusion.

But, since you put it that way, it has gotta be the old Farmall Ms and Hs. Those things are still working everywhere ya look. At up to 65 years of age, not 40.

Lotta JD As and Bs out there too, but I don't see as many in these parts. Yes a lot of 4010s and 4020s.

Allan

third party image

[Log in to Reply]  [No Email]
720Deere

02-25-2005 14:38:15




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to Allan in NE, 02-25-2005 08:16:38  
Allan,

You seem quite knowledgable about the 60s & 70s IH line. Can you educate me on how many 806/826/856 tractors were built? Judging by the serial numbers listed on this site, it appears to be less than 10,000. That just doesn't sound right. I know that they were far more popular than that. Please give us the numbers if you have them.



[Log in to Reply]  [No Email]
Allan in NE

02-25-2005 15:03:00




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to 720Deere, 02-25-2005 14:38:15  
No Sir,

I don't know sic-em. Never paid any 'tention to those numbers or any of my teachers either.

Probably why I'm in the sorry state of affairs I'm in now. :>)

Allan



[Log in to Reply]  [No Email]
Novel Idea Guy

02-25-2005 12:30:28




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to Allan in NE, 02-25-2005 08:16:38  
If you want a 40-year-old example of IH iron that will still be going in 40 more, look no further than the veneralble 806.



[Log in to Reply]  [No Email]
txblu

02-25-2005 08:19:11




Report to Moderator
 Re: Boy did I open a can of worms!! in reply to Allan in NE, 02-25-2005 08:16:38  
Nice pics "The REAL Ron" Grin. (Per IDF of course)

Mark



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy