Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

830 pup compression

Welcome Guest, Log in or Register
Author 
Ron Sharpe

02-19-2005 17:52:32




Report to Moderator

I am doing a compression test on my 830 pup dose any body know what the guage should read?




[Log in to Reply]   [No Email]
WeirdDeere

02-19-2005 20:24:03




Report to Moderator
 Re: 830 pup compression in reply to Ron Sharpe, 02-19-2005 17:52:32  
720Deere is right, I just wanted to mention that you might not be able to check all four. Space for checking the #2 or #4 (can't remember which) is pretty tight! Barely enough to get the spark plug out, much less screw a compression tester in!

Brandon
My Industrial John Deere website
John Deere Diesels
The LaGrange Engine Club

[Log in to Reply]  [No Email]
720Deere

02-19-2005 18:00:11




Report to Moderator
 Re: 830 pup compression in reply to Ron Sharpe, 02-19-2005 17:52:32  
It should be 120 psi for a pony motor.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy