Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

1/3 Gear on B for Stan

Welcome Guest, Log in or Register
Author 
ChuckW

02-15-2005 18:44:26




Report to Moderator

What I meant is that the drive gear for 1/3/reverse is in the same place on the upper shaft of B. This wears a place in the left side of the shaft. Eventually after several years the gear minutely cocks enough that it will work out of position. They made a locker later in 50 production that held the detent in place not reling on the simple spring loaded ball. I've fixed 4 of these and had no other problems. I may have one of these lockers if gentleman needs. My email is unlocked on the subject.

[Log in to Reply]   [No Email]
Stan - Florida

02-16-2005 05:08:08




Report to Moderator
 Re: 1/3 Gear on B for Stan in reply to ChuckW, 02-15-2005 18:44:26  
Chuck,

Thanks for the reply. That makes it more understandable to me.

Best regards,

Stan



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy