Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Building a bucket for my JD 45 loader

Welcome Guest, Log in or Register
Author 
Tom in Jersey S

02-14-2005 14:54:12




Report to Moderator

Hello,

I am preparing to build a new bucket for the model 45 loader on my 60. I also am planning to make this bucket fully hydraulic with rear mounting (as newer buckets are). Obviously this is going to involve significant fabrication. I"ve been, and am still, searching the archives for information on this.

My question is - can anyone recommend what they think would be the proper overall width for the bucket itself without causing stability (or other) issues. I had planned on a 60 inch bucket. The stock bucket is 42 inches. After a discussion I had today with another "tractor guy" I am giving thought to making the bucket only 54 inches wide.

Any opinions or experiences are appreciated. I posted this message in "Implement Alley" also.

THANKS

Tom

[Log in to Reply]   [No Email]
Pete/ME

02-16-2005 08:09:25




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to Tom in Jersey Shore, 02-14-2005 14:54:12  
Tom, posted a pic in the implement section of the photo ads. Sorry about the snow.



[Log in to Reply]  [No Email]
StuBC

02-15-2005 07:20:31




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to Tom in Jersey Shore, 02-14-2005 14:54:12  
third party image

Here is mine with my dog for reference.



[Log in to Reply]  [No Email]
Pete/ME

02-15-2005 02:49:11




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to Tom in Jersey Shore, 02-14-2005 14:54:12  
Tom, get in your pick-up and drive about 10 hrs up here to Maine and you can have a #45 with a bucket/tines and the slide-on for materials that's been converted to double action cylinders on the lift arms and doubles on the bucket. Comes with brackets and controls but the hoses are shot. Came off an "A" nfe. I'm asking $400, will dicker, but need a pair of pressed steel rear rims for my "B" or a decent carb for same, would call that a trade.

[Log in to Reply]  [No Email]
neilho

02-15-2005 17:14:30




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to Pete/ME, 02-15-2005 02:49:11  
Pete-

I'm looking for a loader for my 420W- sounds as if your 45 would work. Tom gets first dibs, of course... I'd be interested in pics, too if available.

Neil in VT
(802)685-3129
(neilhoatinnevi.com)



[Log in to Reply]  [No Email]
Pete/ME

02-17-2005 02:42:25




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to neilho, 02-15-2005 17:14:30  
Neil, Tom opted out, let me know if you're interested.



[Log in to Reply]  [No Email]
Pete/ME

02-16-2005 02:20:12




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to neilho, 02-15-2005 17:14:30  
Neil--I've contacted Tom and will let you know what he decides. Remember though the loader came off a narrow front end "A", don't know if it will fit a wide front end without a lot of fussing.



[Log in to Reply]  [No Email]
neilho

02-16-2005 04:01:54




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to Pete/ME, 02-16-2005 02:20:12  
sounds good- I'm not very familiar with these loaders but can make it work as long as it clears the front axle.



[Log in to Reply]  [No Email]
Tom in Jersey Shore

02-15-2005 03:36:17




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to Pete/ME, 02-15-2005 02:49:11  
Pete,

Can you send your email address to me at [email protected]

I'd be interested in seeing a picture of what you've got there.

TOM



[Log in to Reply]  [No Email]
Henry J

02-14-2005 19:29:53




Report to Moderator
 Re: Building a bucket for my JD 45 loader in reply to Tom in Jersey Shore, 02-14-2005 14:54:12  
Tom

It depends on what you are gonna use the bucket for. Show, cobs, snow, etc

I have a bucket made for my 420 that is for snow only. it is wide enough that it will clear a path for the back wheels.

As for dirt and other such stuff, the bucket I use is a little over 3 feet wide.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy