Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

$ Should be John Dear!!!

Welcome Guest, Log in or Register
Author 
Dixieland

01-29-2005 12:53:04




Report to Moderator

I cannot beleive the prices for JD parts. The local dealer wants $65.00 just for the two outside rockshaft seals and retainers on a 420 T Tractor. Is there anywhere you can get fair prices on this JD stuff?




[Log in to Reply]   [No Email]
Jim@concordfarms.

01-31-2005 08:59:54




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
Dixie, My thinking is that the farm equipment manufacturers design their equipment around as many off the shelf bearings, seals, etc. as they can so they don't have to have as many custom engineered and built for them. I always try to get the trade part number and check w/NAPA before I go to the ag dealer. My favorite example: A few years ago I was into the transmission of an Oliver 88. I needed three studs to go on a bearing retainer. It was 5/16 diameter with coarse threads on one end and fine threads on the other end. Agco parts man looked me and told me with a straight face that they were 12.00 each. I got them at me local hardware store for 1.19 each. Same thing exactly. No need for anything fancy. Wasn't holding boosters on the space shuttle, just a retainer for a roller bearing. That's why I always check with local before going to dealer. Jim.

[Log in to Reply]  [No Email]
Dixieland

01-31-2005 11:51:07




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Jim@concordfarms., 01-31-2005 08:59:54  
Thanks Jim. I appreciate your reply and will do the same.



[Log in to Reply]  [No Email]
Bus Driver

01-30-2005 16:17:22




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
I really have mixed feelings about some of the part prices. I wish I could get them for 15 cents. But if they were only a few dollars 40 or 70 years ago, what would I want if I had invested in them at that time, stored them safely and now can locate and retrieve them, pay someone to pull them from storage and pack for shipment? Would I want as much as if I had put the money in a good investment?

[Log in to Reply]  [No Email]
Dixieland

01-30-2005 18:24:50




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Bus Driver, 01-30-2005 16:17:22  
I'll be dadgum if I know! One thing is for sure, I will be more specific the next time I ask for any information.



[Log in to Reply]  [No Email]
Nathan (SD)

01-30-2005 15:18:43




Report to Moderator
 Re: Breathing Fire in reply to Dixieland, 01-29-2005 12:53:04  
Guys that breathe fire burn everyone else hineys. JD should discontinue more stuff. When JD stops it seems that someone else starts. The new aftermarket guy charges less but still fills the void and makes a good living. JD dealer is alot easier to find than an aftermarket supplier but that covienience costs you. Seems that all the other guys that fix non-JD tractors can still find parts after the mother company folds up. JD has alot of braiwashed followers and it didn't happen by acccident. Their marketing dept. is filled with geniuses. They come up with a gimmicky name for every part or tractor function. ie. COMMAND ARM or STARFIRE or POWER-TROL or SOUNDGAURD or HYDRA-PUSH or too many others. Their ads are nothing but coyright marks with pictures.

[Log in to Reply]  [No Email]
Dixieland

01-30-2005 18:22:08




Report to Moderator
 Re: Breathing Fire in reply to Nathan (SD), 01-30-2005 15:18:43  
Who am I to argue with that. I am not real sure I understand it!
Thanks



[Log in to Reply]  [No Email]
Circillo

01-30-2005 08:22:06




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
Quit complaining. Frankly, I get sick and tired of reading posts or letters to editors of various magazines about the price or quality of parts from Deere / 3rd party suppliers. It"s the same thing with old cars, but enthusiasts have accepted the costs or spend more time salvaging there.

I empathize with the cost & I don"t like paying long either, however, if there are limited sources for parts & we need them, I guess we"re a captive audience. Many people also say "There"s no way it could cost that much to make this particular part". OK - Go make the damn thing yourself & tell me how much it"s worth.

I"m not trying to start a pissing match, but all of us are hostage to the same prices & whining about it does nobody any good. Engineer the repro yourself & get in on the action if you can - It"s a constructive use of your venting time.

Good luck w/ your tractor - One of the best parts of playing with these old beasts is wrench-swinging & parts excursions.

[Log in to Reply]  [No Email]
Dixieland

01-30-2005 08:28:48




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Circillo, 01-30-2005 08:22:06  
Man, this is completly out of hand. Someone must have started a rumer that I was gonna burst your bubble because I was looking for alternate sources for parts. Get a life fellow.
Thanks



[Log in to Reply]  [No Email]
ChuckW

01-30-2005 05:24:03




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
Dixieland: You'll have to get over it. No corporation owes anyone a cheap hobby, if it's too expensive you'll need to look for another hobby. By the way may have what you are looking for, get me some parts numbers and I will look.



[Log in to Reply]  [No Email]
Dixieland

01-30-2005 07:50:21




Report to Moderator
 Re: $ Should be John Dear!!! in reply to ChuckW, 01-30-2005 05:24:03  
Wait a minute! I was'nt asking your permission about where and how I spend my money. A fool and his money is soon parted! I try to be conservative and get beat up on.
Thanks



[Log in to Reply]  [No Email]
Pete/ME

01-30-2005 03:57:29




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
NAPA has a good rep. for stocking or ordering parts for old stuff. I got a sediment bowl for my TO30 off the shelf at one of their stores.



[Log in to Reply]  [No Email]
Dixieland

01-30-2005 07:44:07




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Pete/ME, 01-30-2005 03:57:29  
Thanks. NAPA has been a good source for me on a lot of stuff.



[Log in to Reply]  [No Email]
Loren NC

01-30-2005 02:23:37




Report to Moderator
 Can you get to the old seal numbers? in reply to Dixieland, 01-29-2005 12:53:04  
I needed PTO seals for my 1010. I was surprised that JD had them in stock -- for $22 each. Bought them anyway, put one in and got the number off the old one. Turned out I could get the same seal at a local bearing supply store for $7 so I returned the second $22 one to JD. As several people have pointed out here, it can set on the shelf a while longer there and help run up their inventory costs.

[Log in to Reply]  [No Email]
Dixieland

01-30-2005 03:30:08




Report to Moderator
 Re: Can you get to the old seal numbers? in reply to Loren NC, 01-30-2005 02:23:37  
That is the kind of information I was asking for. Thanks for understanding the question!



[Log in to Reply]  [No Email]
lloyd sc

01-29-2005 20:40:56




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
Hey, just be glad it's not a 1010 & parts ARE available. Having said that, a lot of mom & pop speciality shops need all the busines they can get. So we should all shop around. The Wal-Marts of the world are winning..... ...



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 21:37:50




Report to Moderator
 Re: $ Should be John Dear!!! in reply to lloyd sc, 01-29-2005 20:40:56  
Now, that's the spirit. Nothing wrong in askin around. Thanks



[Log in to Reply]  [No Email]
Bob

01-29-2005 16:30:06




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
Are the seals something special that cannot be crossed over at an industrial bearing and seal place? If, in fact, they are special and only available from Deere, you should be thankful they still have them and QUIT WHINING!



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 16:42:40




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Bob, 01-29-2005 16:30:06  
Who put you in charge of the discussion? I will whine if I want too!



[Log in to Reply]  [No Email]
Bob

01-29-2005 16:57:27




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 16:42:40  
Dixie, I LIKE that reply! ROTFLMAO!!!



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 17:05:09




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Bob, 01-29-2005 16:57:27  
Now you got me tickled. Dat,s what its all about.
Thanks



[Log in to Reply]  [No Email]
Bob

01-29-2005 17:21:54




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 17:05:09  
Dixie, you never did say if you had tried to get the seals at a bearing and seal place????



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 19:51:29




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Bob, 01-29-2005 17:21:54  
Not yet, but I will check into it. Who knows, I might find out they costs more!



[Log in to Reply]  [No Email]
dick carlson

01-30-2005 18:46:53




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 19:51:29  
Boy you sure stirred up a hornets nest. I don't know what the big deal is about trying to save a few bucks. I am sure you can get the seal and retainer cheaper at a bearing supply house than you can from JD. JD don't make seals or there retainers and guess where they get them? From a bearing supply house. Take your old seal and retainer with you or get the numbers off of them and take them to your local bearing supply house and they should be able to fix you up cheaper than JD. That will be the case for any bearings you need also.

Dtractors

[Log in to Reply]  [No Email]
Dixieland

01-30-2005 19:52:49




Report to Moderator
 Re: $ Should be John Dear!!! in reply to dick carlson, 01-30-2005 18:46:53  
Thanks. I don't know what the deal is either but I will take your advice.
Thanks



[Log in to Reply]  [No Email]
RalphinWI

01-29-2005 14:44:14




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
You should go into business and stock them for the rest of us. I was involved in seasonal work thirty years ago. I got the brainstorm I would repair specialized equipment in my slack periods. After I got established I could gross $5,000, which was equal to the cost of my parts inventory. When I sold out, I got $0.50 on the dollar for them.



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 16:17:24




Report to Moderator
 Re: $ Should be John Dear!!! in reply to RalphinWI, 01-29-2005 14:44:14  
I am specialized in my business but not because I am the only game in town. That is why I asked if these parts were available at a fair and reasonable cost. Money may grease the wheel but competition keeps it turning.



[Log in to Reply]  [No Email]
fixerupper

01-29-2005 14:16:39




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
Yesterday I went to the Agco dealer to get a couple of timing hole covers and a wheel rim clamp and wrote a check out for $44.38. The rim clamp was $16.98 and the covers, which are just little stamped tear drop shaped pieces about 1 3/4 by 1 1/8 inch in size with a 5/16 hole in one end,were $13.70 each. I could squeeze all three of these pieces in one hand and completely conceal them when I went out the door.

[Log in to Reply]  [No Email]
Dixieland

01-29-2005 16:05:08




Report to Moderator
 Re: $ Should be John Dear!!! in reply to fixerupper, 01-29-2005 14:16:39  
Hey, I know the feeling. I reckon they think they are a drug store and price is no object if you get what you need.



[Log in to Reply]  [No Email]
buickanddeere

01-29-2005 13:55:42




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
Be glad Mother Deere is still in business and stocks parts of much older equipment than any other company. The cost is in the transportation, handling, storage, $$$ interest tied up sitting in stock, keeping inventory,accounting and dealer markup. Personaly I wonder how they sell some parts so cheap when all is considered.



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 16:12:25




Report to Moderator
 Re: $ Should be John Dear!!! in reply to buickanddeere, 01-29-2005 13:55:42  
I am only doing this for enjoyment but you can't enjoy something you can't afford. Can you imagine trying to farm for a living and giving everthing to the equipment dealers, seed and fertilizer suppliers, oil companies and banks? That is a crying shame when you consider the hours of work and toil it takes just to keep things maintained and getting ripped off on parts.



[Log in to Reply]  [No Email]
Jason(ma)

01-29-2005 13:06:37




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 12:53:04  
I can see you've never bought anything from CAT or Kamatso. Deere prices are fair, half the time the after market ones are just as much or even more.



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 16:13:21




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Jason(ma), 01-29-2005 13:06:37  
Thanks for the warning!



[Log in to Reply]  [No Email]
rej

01-29-2005 18:24:55




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 16:13:21  
Hey dixieland, if you can't stand the heat get out of the kitchen. Bob from NC



[Log in to Reply]  [No Email]
dirtjocky

01-29-2005 20:14:24




Report to Moderator
 Re: $ Should be John Dear!!! in reply to rej, 01-29-2005 18:24:55  
sounds like your daddy gave you everything



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 19:48:53




Report to Moderator
 Re: $ Should be John Dear!!! in reply to rej, 01-29-2005 18:24:55  
Of all the responses I have received, this one is the most irresponsible! I suppose cost does not matter to you. No wonder gasoline and fuel and everthing else needed to exist in todays society is so expensive. Do you believe John Deere cares what you or I think as long as they are making money hand over fist? Oh well, it takes all kinds I guess.



[Log in to Reply]  [No Email]
rej

01-29-2005 20:49:51




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 19:48:53  
Hey dixieland, you're the one complaining about the cost. I'm a retired farmer and I operated and owned Allis ,Massey ,International and Deere. Just sit down and take it easy, there will always be plenty of something to eat and drink in our country. Bob from NC



[Log in to Reply]  [No Email]
Dixieland

01-29-2005 21:42:30




Report to Moderator
 Re: $ Should be John Dear!!! in reply to rej, 01-29-2005 20:49:51  
Hi Bob. You must have mis-interpeted my question. It was'nt meant as a complaint, I was trying to find out if the parts might be available elsewhere at a resonable cost. Thanks for your reply.



[Log in to Reply]  [No Email]
buickanddeere

01-30-2005 16:23:37




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-29-2005 21:42:30  
Dixie

Sorry but it sounds like you don't care much for North either. "parts might be available elsewhere at a resonable cost." Hmmmmm mmmmm..."reasonable" in who's mind, the buyer or the seller? Do you want the company to go broke supplying parts at less than the cost of selling them? Don't cry poor, you chose the income. I wanted to farm but I'm not a big fan of near poverty. Outside income and a hobby farm makes everyone happier around this place.

[Log in to Reply]  [No Email]
Dixieland

01-30-2005 18:35:52




Report to Moderator
 Re: $ Should be John Dear!!! in reply to buickanddeere, 01-30-2005 16:23:37  
Now I am being accused of re-kindling the civil war, being poor, and insighting poverty! Well, if ya'll want to pick a fight, look down on the south, and thumb your nose at the poor, just because I asked for some information, just forget I asked!!!
Thank you very much!!



[Log in to Reply]  [No Email]
buickanddeere

01-30-2005 20:32:29




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-30-2005 18:35:52  
Let's see, the rational goes something like this. You and most of the people you know. Work long and hard and have little left over to show for all that work. Now you see people/companies "making money hand over fist." And they are not working as long and as hard as you. Well them rich people must be crooked thieving cheats to be getting all that money. You know how hard your are working and being honest with the smaller $$$ return. About now comes the bible quotes about evil wealthy people going to h*ll and how the poor are looked after by the Almighty. That quote about the camel through the "eye of a needle" isn't a sowing needle. It's a narrow street with a low overhead portion, located in old Jerusalem. The camel driver had to dismount and get the camel to crawl on it's knees to get it's back/cargo underneath. Difficult but possible to train/force and camel to crawl. These wealthy people made $$$ by working hard and working smart. You can shovel all the stables you want, as hard as you want but you are not going to uncover any pearls. You have to go other places and do different things to harvest pearls instead of "fertiliser".

[Log in to Reply]  [No Email]
Dixieland

01-31-2005 04:58:18




Report to Moderator
 Re: $ Should be John Dear!!! in reply to buickanddeere, 01-30-2005 20:32:29  
I usually don't judge people but you are a NUT!



[Log in to Reply]  [No Email]
buickanddeere

01-31-2005 06:23:38




Report to Moderator
 Re: $ Should be John Dear!!! in reply to Dixieland, 01-31-2005 04:58:18  
It's more accurate to judge a person by looking at the type people who don't like them. Rather than looking at their friends. I'm not feeling insulted at the moment by the way. I heard a wise and wealthy person say one time. "You are not going to change a persons mind who has already made it up". And "some people don't like to confuse the issue with facts". Come to think of it, this wise person said " don't argue with a fool, people may not know the difference". Also said " don't wrestle with a pig, you both get dirty and the pig likes it". On that note this is my last reply.

[Log in to Reply]  [No Email]
Dixieland

01-31-2005 11:53:03




Report to Moderator
 Re: $ Should be John Dear!!! in reply to buickanddeere, 01-31-2005 06:23:38  
No hard feelings but you can KMA!!!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy