Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

70 Brakes

Welcome Guest, Log in or Register
Author 
jdman(MO)

01-28-2005 13:16:00




Report to Moderator

What is the best way to get the drums off, after the big nut is removed. Russ




[Log in to Reply]   [No Email]
ChuckW

01-28-2005 16:33:13




Report to Moderator
 Re: 70 Brakes in reply to jdman(MO), 01-28-2005 13:16:00  
I'm sure the rivets are available but putting them in and making them look good is something else. They were pressed on a factory and you can try to put them on without a press but beating on the head will make an awlful appearance. You might heat the end and be careful and get a good job.



[Log in to Reply]  [No Email]
jdman(MO)

01-28-2005 15:45:04




Report to Moderator
 Re: 70 Brakes in reply to jdman(MO), 01-28-2005 13:16:00  
Thanks to both of you, success on the first one just had to use a bigger hammer, and a little heat. Now I wonder if the rivets are available from JD, 4 missing. You are right I hate brakes, but the other guy hated them more, that why I am doing them. Russ



[Log in to Reply]  [No Email]
F-I-T

01-28-2005 17:10:20




Report to Moderator
 Re: 70 Brakes in reply to jdman(MO), 01-28-2005 15:45:04  
I'm not sure if this is the right number or not, but you can measure one of the holes to find out the diameter. Since the drum for the '70' came equipped for removal by that large nut, the rivets were not meant to be removed routinely. However, on the lettered series like the "A", the rivets were shown as replaceable. THe old part number was 16H1346A, and that has been subbed to 16H1342, and it is available at the dealer for 22 cents each.

Take you time and maybe come up with a steel cup that will receive the rivet, heat it red hot then set it. If you get a consistent, although different look from that of the originals, consider replacing the originals, too, so all will look alike. At 22 cents a piece, you could afford a few screw ups!

Hope that helps!

Frank

[Log in to Reply]  [No Email]
ChuckW

01-28-2005 13:48:36




Report to Moderator
 Re: 70 Brakes in reply to jdman(MO), 01-28-2005 13:16:00  
I've found the best way is not to remove the nuts, just back them off a few rounds then tap the out side of the nut and the shaft will release, then remove the nut. Otherwise you will wind up messing up the threads on the shaft. Once the adjusters are released it shouldn't take but a jar to loosen the shaft from the drum. I alway use a large 3/4 drive and be very careful not to cross threat the nut on reinstalling. Use a little never seize on the threads also.

[Log in to Reply]  [No Email]
John T

01-28-2005 13:44:27




Report to Moderator
 Re: 70 Brakes in reply to jdman(MO), 01-28-2005 13:16:00  
jdman, First thing I usually do is have the adjusters set in (shoes AWAY from drum) loose to the max,,,,, ,then spray some PB Blaster etc on the shaft n drum area,,,,, ,,then I start with a hammer and peen n shock n tap all around n around n outward on the drum PLUS use an oak block and with the nut just on (or protect the threads) strike inward on it to shock the drum off on the removable nut n drum (later) brakes. Of course, on the older non removeable (shaft n drum together) I have the entire assembly removed and after the big gear and nuts removed, use an oak block to either drive the shaft n drum out or else drop it downwards on an oak block to accomplish the same. After a good clean up, I shine/buff/polish the cams n pins and use a lil anti sieze on them plus the adjuster threads. Brake work is a dirtyyyyy y job n not my favorite.

John T

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy