Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

1938 AR manuals

Welcome Guest, Log in or Register
Author 
Marty Z

01-28-2005 12:53:58




Report to Moderator

Just getting started on my 38 AR and need Operator,Service ,and Parts manuals. Any thing I should stay away from , and who do you recommmend. Also need a # to call or a web site I could order from ... Thanks
Marty Z




[Log in to Reply]   [No Email]
Rudy in TX

01-29-2005 07:31:49




Report to Moderator
 Re: 1938 AR manuals in reply to Marty Z, 01-28-2005 12:53:58  
Marty, my AR had some problems in the trans and in the engine. I had some gears tore up and the head was cracked bad. The block was cracked in the cylinder wall. I sleeved the block and replaced the head. The head was a little hard to find. I posted a want ad here on YT and got one real quick. Sharps in MO helped me out a lot. I also had to replace the rad. core. Like I said its running good now just need to paint it. Its probaly my favorite of my JDs

[Log in to Reply]  [No Email]
Rudy in TX

01-28-2005 18:07:38




Report to Moderator
 Re: 1938 AR manuals in reply to Marty Z, 01-28-2005 12:53:58  
Call the John Deere Distribution Service Center at 800-522-7448. They can help you with what is available. I have a 1940 AR that I have been working on and have it running good just need to finish it up. Have fun!



[Log in to Reply]  [No Email]
Marty Z

01-28-2005 23:05:21




Report to Moderator
 Re: 1938 AR manuals in reply to Rudy in TX, 01-28-2005 18:07:38  
Just got a broken off manifold stud out tonight. Feeling prety good. Lots of heat , candle wax and a series of left hand drill bits worked real good.FYI
thanks for the info.
marty Z



[Log in to Reply]  [No Email]
Marty Z

01-28-2005 22:58:06




Report to Moderator
 Re: 1938 AR manuals in reply to Rudy in TX, 01-28-2005 18:07:38  
Thanks Rudy.
That is the # I was looking for.
marty Z



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy