Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

410 engine removal.

Welcome Guest, Log in or Register
Author 
Machinist3

01-12-2005 15:34:18




Report to Moderator

Hey Guys.
Bad news here.
I bought my 410 on the assumption that the motor was good, Just needed some bleeding and tinkering to get it running.

Never assume and watch out whose word you take.

The motor was so worn out that it wouldn't start with ether. So I pulled pistons and found everything completely worm out. To add to that, all of the mains had spun. The crank is not too bad but I am in the process of pulling it for grinding. I have the front end off and am hoping to get the block out tomorrow.

Is there anything that you know of that I should be looking for? I am going to get the complete rebuild kit, ( + balancer bushings ) have the head reworked, grind the crank, some new hoses.

Anything on the tranny or reverser that should be checked while the engine is out?

All comments are welcome.
Thanks.
John

[Log in to Reply]   [No Email]
Jonathan in MA

01-13-2005 13:56:46




Report to Moderator
 Re: 410 engine removal. in reply to Machinist3, 01-12-2005 15:34:18  
Might want to remove the cross shaft that operates the throw-out bearing and then remove that aluminum cover and the clutch pack assembly thats right there. Thats the clutch pack for forward and its relatively common with age for the piston rings to be worn etc... Results in no power /slipping in forward. If its still the one piece cross shaft, then u have to cut it to remove it ..Its replaced by a 2 piece shaft that is joined by a plate that operates the throw-out bearing. If its a one piece shaft then that means no-one has probably ever been in there and u should definitely disassemble and reseal...

[Log in to Reply]  [No Email]
Machinist3

04-15-2005 06:30:17




Report to Moderator
 Re: 410 engine removal. in reply to Jonathan in MA, 01-13-2005 13:56:46  
I"m back!!
Got the crank ground, block dipped, & the head reworked. Pulled the front clutch pack out, The clutches are shot, and the teeth on the clutches are worn off, but the hub is good. A friend said I should go ahead and pull the trans out and check every thing in it. Pump, gears, etc.
Anyone done this before? Anything I should be looking out for? This thing is getting out of hand.
At least it should be dependable when I get it back together.
Thanks in advance for your advice.
John

[Log in to Reply]  [No Email]
Machinist3

01-14-2005 06:27:49




Report to Moderator
 Re: 410 engine removal. in reply to Jonathan in MA, 01-13-2005 13:56:46  
Fantastic. This is the kind of info I am looking for.
I will be sure to check it out and post my findings.
Thanks, John



[Log in to Reply]  [No Email]
twopop

01-12-2005 16:21:33




Report to Moderator
 Re: 410 engine removal. in reply to Machinist3, 01-12-2005 15:34:18  
if the mains have spun,it will probably need to be line bored.the block might not be any good.check it first.



[Log in to Reply]  [No Email]
Machinist3

01-12-2005 18:41:20




Report to Moderator
 Re: 410 engine removal. in reply to twopop, 01-12-2005 16:21:33  
Thanks, I had planned on that.
Does anyone know the specs on the journals?

I have been really pleased at how easy it is to work on so far. I had the pistons out from start to finish in about 4 hrs.
Thanks for the info,
John



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy