Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4620 Engine Noise

Welcome Guest, Log in or Register
Author 
Bob Kee, Kerrvi

01-01-2005 06:00:22




Report to Moderator

I recently acquired a JD 4620 that, overall, is in good shape. It has a total time showing of about 5900 hours and appears to have had good service care. The engine has a loud tapping noise that starts at engine speeds north of 2000 rpm. After the tractor has warmed-up, it can be heard while the tractor is stationary at speeds above 1500 rpm. Listening to it with a stethescope, it sounds like it is coming from the center of the engine in the upper half; very little noise is picked up from the oil pan area. I thought that maybe a valve adjuster had come loose, so I took off the valve cover and checked clearances: all seemed O.K.

I'm looking for some guidance on what might be pattern failures on this engine before tearing into it much deeper. I'm thinking maybe a dropped valve guide or a wrist pin??

Thanks for any help. I'm a first timer to this forum.

[Log in to Reply]   [No Email]
jon-deer

01-02-2005 15:41:31




Report to Moderator
 Re: 4620 Engine Noise in reply to Bob Kee, Kerrville, TX, 01-01-2005 06:00:22  
Had the same problem with a 4430, took the pan off and found one rod bolt loose, it caused the piston to tap the head at higher rpm.s, replaced rod and main bearings and rod bolts.
set the hp. up to 150 and its ben fine ever since (about 250 hrs.)



[Log in to Reply]  [No Email]
thurlow

01-01-2005 11:28:05




Report to Moderator
 Re: 4620 Engine Noise in reply to Bob Kee, Kerrville, TX, 01-01-2005 06:00:22  
You seem to have (maybe) eliminated this with your stethoscope, but the FIRST place I always look with suspicious engine noises in the New Generation tractors is the hydraulic pump coupling..... ...



[Log in to Reply]  [No Email]
JDBert

01-01-2005 11:04:50




Report to Moderator
 Re: 4620 Engine Noise in reply to Bob Kee, Kerrville, TX, 01-01-2005 06:00:22  
Like bob said, have your injectors checked before you burn up a piston due to improper spray patterns.



[Log in to Reply]  [No Email]
Henry J

01-01-2005 10:53:07




Report to Moderator
 Re: 4620 Engine Noise in reply to Bob Kee, Kerrville, TX, 01-01-2005 06:00:22  
Bob

The other Bob brought up an interesting point. I know nothing about the particular motor you have but I have a clanker under the hood of my ford truck.

What navistar did to shut up the clanking noise that was prevalent in the 99 power stroke is top secret, but for a long time I thought it had like a bent push rod or collapsed lifter. It made a clanking/loud clicking noise, which was most prevalent at lower rpm. Ford later blamed it on the no 8 injector and replaced it a couple of times. I finally nick named my ford "the clanker."

It still remineses at times and makes the sweetest clanking noise for me when it is idiling. Anyway that has been 5 years and 95 thousand miles and me and the ford just tolerate each other. It runs good.

The mechanics would listen out the door at the garage and say "that is just diesel knock."

But I have never heard of JD's being nick named "clankers."

Good Luck this year

[Log in to Reply]  [No Email]
4boyz

01-01-2005 09:55:47




Report to Moderator
 Re: 4620 Engine Noise in reply to Bob Kee, Kerrville, TX, 01-01-2005 06:00:22  
Maybe there is bent pushrod, that is flexing while the engine running.Is there a miss?Excessive blowby?Maybe a piece of ring on top of piston.I'm sorry to bring in the worst case scenerio.



[Log in to Reply]  [No Email]
bobkee

01-01-2005 10:48:08




Report to Moderator
 Re: 4620 Engine Noise in reply to 4boyz, 01-01-2005 09:55:47  
The engine does not seem to miss or have excessive blowby. Power delivery overall seems normal.



[Log in to Reply]  [No Email]
Bob

01-01-2005 06:24:55




Report to Moderator
 Re: 4620 Engine Noise in reply to Bob Kee, Kerrville, TX, 01-01-2005 06:00:22  
Have the injectors checked.



[Log in to Reply]  [No Email]
msb

01-01-2005 11:41:12




Report to Moderator
 Re: 4620 Engine Noise in reply to Bob, 01-01-2005 06:24:55  
This bob agrees with the other bobs.Listen with the scope touching each injector.Sometimes they will fool you so take then all to be checked.You will think it is one injector only to find it is two cylinders away from where the noise seems to be coming from.And whatever you do, don't bend or even force those lines from the pump to the injectors.Remove them if you have to when pulling the injectors.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy