Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

70 D starter motor rebuilt

Welcome Guest, Log in or Register
Author 
Dan in Ohio

12-17-2004 18:43:23




Report to Moderator

As it has gotten colder I have had more and more trouble starting one of my 70 D's. Thought my battery was dead, again, but I knew it could not be as its only a couple of months old. The starter just barely would turn the pony over and it did not seem to want to fire up. As in the past I noticed the cable going to the starter was warm and the end plate on the starter was getting hot. A while ago FIT scolded me for telling a guy to be careful not to run his starter too long as it might burn up. Basically he said something must be wrong if my starter is getting hot, so I took it to my JD dealer to have it rebuilt(they have an electric specialty shop). Wow what a difference, the starter spun the pony so fast I could not believe it and it fired right up immediately, thats never happened. Moral of the story is this, if your starter is not performing its job get it rebuit, and stop blaming that 6v system. Its very cold here in Ohio tonight but the 70 started right up, I even went for a ride.

[Log in to Reply]   [No Email]
F-I-T

12-17-2004 20:03:38




Report to Moderator
 Re: 70 D starter motor rebuilt in reply to Dan in Ohio, 12-17-2004 18:43:23  
Dan:

I didn't scold you, did I? I sure didn't mean to! :)

Anyway, you are sure right about needing everything right on a 6 volt system, but when it's up to snuff, those pony's are hard to beat in cold weather. I can't count the number of times that we used our 70D to pull start many of the more "modern" neighborhood tractors, including our 4020D. I still like to hear a pony rip on cold morning!

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy