Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

1000/540 PTO

Welcome Guest, Log in or Register
Author 
DDK

11-30-2004 09:52:39




Report to Moderator

Does anyone know why they make 1000 RPM and 540 RPM PTO's ???? Why don't they just make one or the other ??? Is one better than the other??? I have been told that the older tractors used to have 1 1/8 " PTO shafts instead of the standard 1 3/8 " 540 shafts. Did they spin faster ??




[Log in to Reply]   [No Email]
1020gas

11-30-2004 15:18:24




Report to Moderator
 Re: 1000/540 PTO in reply to DDK, 11-30-2004 09:52:39  
My understanding of it is that the equipment being run determines the PTO speed that needs to be selected on the tractor. Some equipment runs on 540 rpm (6 spline shaft). Other equipment requires 1000 rpm PTO's (21 spline shaft). I think 1 3/8" D is the standard that has been adopted in recent years.



[Log in to Reply]  [No Email]
Matt871

11-30-2004 10:01:10




Report to Moderator
 Re: 1000/540 PTO in reply to DDK, 11-30-2004 09:52:39  
The 1000 RPM shaft was developed to handle higher horsepower in the late 50's and early 60's. By increasing the speed, the torque load is reduced, allowing the shaft to transmit more power without breaking or having to greatly increase the diameter of the shaft. 75-100HP is about the maximum load for a 540 PTO.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy