Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Found 530LP

Welcome Guest, Log in or Register
Author 
garrett

11-16-2004 17:49:52




Report to Moderator

i found a 530lp tractor sitting in a grove. does not have a three point,dual hydraulics or a wide front. the owner said it ran when he parked it but it sat outside with nothing over the exhaust but it really is not in bad shape he wants $2500 for it is it worth it? thanks garrett




[Log in to Reply]   [No Email]
Cash Moline

11-18-2004 11:00:09




Report to Moderator
 Re: Found 530LP in reply to garrett, 11-16-2004 17:49:52  
Hi...I'd be interested in buying it from you and could pick up whereever it's at. Thanks.

Cash Moline
Austin, TX -and I have a place in Wis. too.
[email protected]
512-458-9575



[Log in to Reply]  [No Email]
jd2830

11-17-2004 04:00:41




Report to Moderator
 Re: Found 530LP in reply to garrett, 11-16-2004 17:49:52  
Bruce L who said that they could get propane pistons for the 530 and possible a 630



[Log in to Reply]  [No Email]
Bruce L

11-17-2004 20:31:07




Report to Moderator
 Re: Found 530LP in reply to jd2830, 11-17-2004 04:00:41  
I was talking with Tom Detwiler at one of the shows this summer about some newly produced parts becoming available (such as lights for flat top fenders). I asked him specifically about 630LP pistons and he told me he now had a source for them. I believe he indicated he could get them for other models also. I haven't talked to him since then however. He specializes in reproduction parts. It is possible he misunderstood me, but I don't think so. I asked him twice because I wanted to be sure he understood I was talking about LP pistons. I don't think he has a web site. Here is his address:

DETWILER TRACTOR PARTS
Tom Detwiler
S3266 Hwy 13 So.
Spencer, WI 54479
715-659-4252
(JD tractor parts)

[Log in to Reply]  [No Email]
Bruce L

11-16-2004 19:44:28




Report to Moderator
 Re: Found 530LP in reply to garrett, 11-16-2004 17:49:52  
It probably would be to me. A 530LP is somewhat rare. I happen to like LP tractors and have several of them. I would be concerned about it sitting exposed like that because if the cylinders are in poor condition and need boring, it may be difficult to get oversize pistons. It was just about impossible but I know of one vendor who told me he could get them. I believe other major engine parts such as the crank and the head are also unique to the LP tractor. LP is always a safety concern, especially if stored in a relatively air tight building because of the potential for a fuel leak. They start a little harder in cold weather. They are difficult to fuel in cold weather if you don't have a pump on the lp fuel source tank. I just have a hose on my bulk tank. But the engines run great when in proper tune and last a long time. The lp tank on the tractor itself is somewhat of an eyesore but on the 30 series I think it looks pretty good. If you don't get it, I would be interested as I'm sure others would be.

[Log in to Reply]  [No Email]
Steve M

11-17-2004 12:46:15




Report to Moderator
 Re: Found 530LP in reply to Bruce L, 11-16-2004 19:44:28  
I would like to know who to contact about getting pistons for 420tlp. Thanks for any info.



[Log in to Reply]  [No Email]
Bruce L

11-17-2004 20:39:19




Report to Moderator
 Re: Found 530LP in reply to Steve M, 11-17-2004 12:46:15  
Don't know if this will help you but Tom Detwiler told me last summer he could get pistons for my JD 630LP and other models. I haven't gone back to him on it yet because I haven't done any dissassembly and don't know what oversize I will need.

DETWILER TRACTOR PARTS
Tom Detwiler
Spencer, WI 54479
715-659-4252
(JD tractor parts)



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy