Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

48 B Transmission won't shift to high

Welcome Guest, Log in or Register
Author 
Bill in Indiana

10-23-2003 13:47:16




Report to Moderator

Hello all,

I've searched through the forums but couldn't find anything on my particular problem.

When my '48 B warms up, the transmission won't shift from the low side (1, 2, 4, R) to the high side (3, 5, 6). The shift lever acts like it's hitting something solid, but will move if I give it a kick over to high (that's the only way I can get the shift lever to move over to high).

Then when I let the tractor sit over night so it cools off, I can shift it again. It sounds like some sort of interference, but I'm not sure.

Thanks in advance for your help.

[Log in to Reply]   [No Email]
CLW

10-24-2003 09:16:47




Report to Moderator
 Re: 48 B Transmission won't shift to high in reply to Bill in Indiana, 10-23-2003 13:47:16  
Bill, I will tell you what happened to me with a 52 A that did the same thing. I bought the tractor from out of state without seeing it. Had it hauled and when they went to unload it it would not shift. Long story short, try lifting the shift lever up before you shift.( Mine would come up about 1/2 inch.) The snap ring was gone on the shift lever at the top of the spring in the quadrant. Spent 3 cents and 2 min. and it worked fine. CLW

[Log in to Reply]  [No Email]
Clooney

10-23-2003 17:58:15




Report to Moderator
 Re: 48 B Transmission won't shift to high in reply to Bill in Indiana, 10-23-2003 13:47:16  
Bill, that is a strange occurrence...
~Does it act the same with the engine running & turned off? If it only does it with the engine running it sounds like maybe your clutch is dragging a little.
~If it acts the same with the engine turned off you will probably have to pull the trans shifter cover & see if you can find something wrong with the Hi/Lo shift interlock...



[Log in to Reply]  [No Email]
Bill in Indiana

10-24-2003 10:50:54




Report to Moderator
 Re: Re: 48 B Transmission won't shift to high in reply to Clooney , 10-23-2003 17:58:15  
Mr. Clooney,

It does the same thing with the engine running vs. off.

I also tried engaging the clutch, disengaging it and letting it stop on its own (didn't use pulley brake), and trying again, but no luck. I also tried pulling up on the shifter and trying to shift, then tried pushing down but still no luck.

If the clutch was dragging, wouldn't the pulley be moving?

Looks like I may have to pull the cover off this winter when the tractor's not needed.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy