Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

630LP Smooth Flat Hood Tractor found - such a thin

Welcome Guest, Log in or Register
Author 
Cash Moline

11-06-2004 13:42:01




Report to Moderator

Hey came across a 630 LP tractor that is a 1960 and on the tag it reads 630 LP too. But unlike the 630LPs I've seen the tank is under the hood, so the hood goes smooth or flat all the way across. Did Deere modify their design later on in these or does anyone know about this. Thanks.




[Log in to Reply]   [No Email]
KIP

11-09-2004 16:15:59




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found - such a in reply to Cash Moline, 11-06-2004 13:42:01  
Could it be that it was a cotton picker tractor? That may account for the low profile tank.



[Log in to Reply]  [No Email]
CLW

11-08-2004 12:31:39




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found - such a in reply to Cash Moline, 11-06-2004 13:42:01  
Cash,
I will tell you what I know, what I think, what I don't think, and what I don't know.
I KNOW = the tractor has a Gas steering support and not a LPG support. The steel plate (heat shield) you spoke of is one piece on Gas and two peice on LPG.
I THINK = it has a Gas manifold as best as I can tell from the picture. The LP manifold does not have the manifold valve this one seems to have. It looks as if there is, or was, a gas guage on the dash. I DON'T THINK = the tractor came from Deere this way for at least two reasons. They would not let one leave with the vapor and liquid valves exposed. They would cover them like the 630 or put them under the hood like the 60-620 for safety reasons. Also this would be way late in the game for Deere to be testing the fuel system of a 3010 LP.
I DON'T KNOW why it has a LP tag. It could have been changed but my bet would be the main case or compleat rear end of a LP was put on a Gas tractor becouse of rear end problems of some kind. This would come with the LP tag attached. You didn't ask but I would think this tractor is worth less now than a Gas or LPG unless you could prove it came from the factory this way.
CLW

[Log in to Reply]  [No Email]
Cash Moline

11-08-2004 11:44:56




Report to Moderator
 630LP Smooth Flat Hood Tractor found- such a thing in reply to Cash Moline, 11-06-2004 13:42:01  
Also I need to clarify the tank is a Round tank under there not flat like I implied. Its maybe 1.5 x 1.5 feet and its pretty long, enough so that I can't figure out how long for sure but it sits right in front of the dash area and runs toward the nose area. And the steering wheel rod goes over the top side of the tank.

Thanks.



[Log in to Reply]  [No Email]
Cash Moline

11-07-2004 23:11:04




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found - such a in reply to Cash Moline, 11-06-2004 13:42:01  
Also we did find this in the registry but no mention it was an experimental - the register says the s/n6314*** was a row crop LP shipped 11/24/59 to the K.C.Mo. branch then on to the Mangum Okla. (no other notes or special notes).



[Log in to Reply]  [No Email]
Cash Moline

11-07-2004 23:07:12




Report to Moderator
 630LP Smooth Flat Hood Tractor found - such a thin in reply to Cash Moline, 11-06-2004 13:42:01  
third party image

I posted 4 pictures now in the link below. Sorry they aren't bigger. I didn�t mention that the steering wheel rod on this one runs off to the side, not through the middle of the tank area like the original 630 LP. There are no or were never any gasoline holes on this hood that we can see top or underneath. The large tank on front is a modification the last owner of this tractor the last 20 years came up with and put on since the flat LP tank under the hood doesn't hold much. He also took the back wheels off this tractor a couple months ago to put on one of his other tractors due to better fuel efficiency. Thanks.

[Log in to Reply]  [No Email]
buickanddeere

11-08-2004 12:17:41




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found - such a in reply to Cash Moline, 11-07-2004 23:07:12  
Sure glad you asked questions rather than cutting it up 1st. That tractor info, part numbers, history and detailed photos would make a great topic for one of the Deere magazines to do an article on. I like both magazines but one has some serious access to Deere internal documents. That maybe a one of a kind and valuable tractor. Or just a real clean farm conversion?



[Log in to Reply]  [No Email]
Bubba h

11-07-2004 13:06:03




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found - such a in reply to Cash Moline, 11-06-2004 13:42:01  
Also the steering rod runs through the middle of the original LP tank. The tank is made roughly like a doughnut. I would like to know how this one was run.



[Log in to Reply]  [No Email]
gusc

11-06-2004 21:05:16




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found - such a in reply to Cash Moline, 11-06-2004 13:42:01  
I'm with CLW here, I don't see how a tank with square corners can hold up under LP pressures?? I have never seen an LP tank of any kind that wasn't round?



[Log in to Reply]  [No Email]
CLW

11-06-2004 15:41:55




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found - such a in reply to Cash Moline, 11-06-2004 13:42:01  
Cash, are you saying you can't tell the difference if viewed from a distance? I have never heard of one like that. Would think if someone changed it, it would have to have a VERY small tank. My 630 was built in Sept. of 58 and the tag reads 630LP1xxx. The LP part of the serial number looks like it was put in with a different stamp than the rest of the tag, but still factory. You weren't able to get a picture of it were you? No Deere didn't modify the later tractors.
CLW

[Log in to Reply]  [No Email]
Cash Moline

11-06-2004 16:24:41




Report to Moderator
 630LP Smooth Flat Hood Tractor found-such a thing? in reply to CLW, 11-06-2004 15:41:55  
It is a long flat tank that runs under the hood. And there is a long flat peice of metal between there and the engine protecting it from the heat, etc. I guess. I have pictures now. There are a couple LP valves coming out of the left hand side of the hood and everything look factory on it unlike you'd see on a modification. And again 630 LP is on the tag and its a 1960 model. The farmer who owned it for the last 20 years got tired of the small tank on there so he added a large tank now to the front of the tractor that rides in like a basket in front of the grill. But that part is his modification and the only one that we can tell or know of. I'm having someone look up the number in their serial book to see if any notes were made beside the city and dealer it shipped to and date and all that. I'm thinking Deere would not of put experimental on the tag during these years like I believe they did in the early days. Possilby would just pull one off the line and experiment with it but I'm not sure. I'm hoping the serial number research tells me something. Thank you for your help.

[Log in to Reply]  [No Email]
Cash Moline

11-06-2004 18:21:51




Report to Moderator
 630LP Smooth Flat Hood Tractor found-such a thing? in reply to Cash Moline, 11-06-2004 16:24:41  
Also thought of how the 3010 LPs from the factory had the LP tank hidden under the hood so that it was flat all across and looked just like any other 3010, unlike the uglier 4010 LP with front hood tank. So maybe this 630 LP was a experiment to that 3010 LP design?



[Log in to Reply]  [No Email]
CLW

11-06-2004 20:08:31




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found-such a th in reply to Cash Moline, 11-06-2004 18:21:51  
I may be all wet here but I thought tanks under that kind of pressure had to be round and no corners on them. All LP tanks and air tanks I have seen were built round.
CLW



[Log in to Reply]  [No Email]
buickanddeere

11-06-2004 21:11:08




Report to Moderator
 Re: 630LP Smooth Flat Hood Tractor found-such a th in reply to CLW, 11-06-2004 20:08:31  
It could be a custom rectangular job but the internal bracing would be a tough installation inside the tank. Or it was made from one mighty robust chunk of square tubing? I wonder if Mother Deere or a previous owner just used a smaller dia round LP tank and the gasoline sheet metal? I'd enjoy seeing a few pictures of this one.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy