Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Classic 4020 fans Question

Welcome Guest, Log in or Register
Author 
fsfs

11-02-2004 12:18:58




Report to Moderator

A lot of jd fans believe that the only thing we need is that they start making a new 4020 tractor and they would sell like hotcakes. I believe that jd does make a new jd 4020 type of tractor, the jd 6703. seems like they arent a very hot item. what are your thoughts.




[Log in to Reply]   [No Email]
Lyle (Sask)

11-03-2004 08:43:04




Report to Moderator
 Re: Classic 4020 fans Question in reply to fsfs, 11-02-2004 12:18:58  
Hi, just a couple of thoughts...

1. I don't think the 4020 or it's modern variants fits today's farm reality...
Most farmers today have more land, and require larger implements to get that land covered in the precious time they have for planting and harvesting. It's said today that with continuous cropping in western canada, the most important implement in the shed is the sprayer, and that now is often a special purpose self propelled unit.

2. When I farmed growing up with my Dad, we had 2 4020's and farmed about 800 acres. We also ran a small herd of cattle. The most amazing thing about the 4020 was that it was truely a tractor that could do it all on that size of farming operation... We used it for seeding, tillage of fallow land, and then yanked the duals off for harvesting, puling a sprayer, with a loader we mucked corrals, and did all our haying. With a dozer we drained low spots in the field, and in the winter it happily plowed all the snow we could find with a front mounted blower.

My dad used those 4020's for 30 years, and at the end of that time, just like my dad they were pretty wore out and ready for retirement ...
But no rest for the weary, someone picked both those units at the auction, and it wouldn't surprise me if they are still running today, and if not, they probably contributed a few vital organs to keep some of there brethren running.

Looking back, they weren't perfect... Noisy, prone to springing some leaks in that hydraulic control unit under the dash, and a bit thirsty when pulling a full load in the field.

But the lasting memory of the 4020's for me, is how tough and dependable they were... All those years, and I remember only a few occasions where one of them went out of service during a critical season. Today's Farmer needs a 300 HP 4020 that is still nimble enough to get in the barn and muck out a stall.. Don't think that's feasible ...

My opinion only, your mileage may vary ...

[Log in to Reply]  [No Email]
G-MAN

11-03-2004 10:20:50




Report to Moderator
 Re: Classic 4020 fans Question in reply to Lyle (Sask), 11-03-2004 08:43:04  
Good post, Lyle. I agree with a lot of what you said. I think time has made the 4020 more legendary than it was even in it's hayday as a "big" farm/field tractor. To hear a lot of guys talk nowdays, they were simply perfect and never gave a lick of trouble. Time makes the heart grow fonder, I guess. But, we all know that is pretty unlikely. All makes, models and individual machines have their problems. But, they were simply the best thing going when introduced - miles ahead of anything else available at the time. Some manufacturers didn't produce a model as capable or with the same features for another decade. Sure, there were other tractors that could maybe pull a plow faster, or were a little more manueverable etc, but as far as having the longest list of features and being excellent general-purpose machines that could do just about anything, they had no equal in the time period. The 4430 and 4440 carried on that end-all/do-all tradition for Deere. As time goes on, more and more of them are relegated to light-duty work such as loader tractors, shredding, blading snow an even restoration. They deserve to be preserved and restored, as they were and still are one of the best tractors ever built. And more horsepower was sold as John Deere 4020s than any tractor before or since - period.

[Log in to Reply]  [No Email]
ptfarmer

11-03-2004 09:01:46




Report to Moderator
 Re: Classic 4020 fans Question in reply to Lyle (Sask), 11-03-2004 08:43:04  
good post and I believe it is very true about the 4020



[Log in to Reply]  [No Email]
pav

11-03-2004 05:20:13




Report to Moderator
 Re: Classic 4020 fans Question in reply to fsfs, 11-02-2004 12:18:58  
what made the 4020 so special. I think, a large part, it was a different time and culture, that a lot of people think they want back. Tell me what made the 4020 so special, that a modern tractor cant replace. dont say price, remember time value of money.



[Log in to Reply]  [No Email]
G-MAN

11-02-2004 13:44:47




Report to Moderator
 Re: Classic 4020 fans Question in reply to fsfs, 11-02-2004 12:18:58  
I don't know beans about the 6703, but a lot of people DO want the 4020 back. The only problem is that they don't want the price a new one would go for today. The 4020s were largely hand assembled, and I've seen estimates that the labor and materials involved in building one today would push the cost into the $70,000+ range. Or basically right where most current 90-horsepower tractors run. And then there would be all the necessary updates to meet emissions, safety requirements that have come online since '72, etc. If you want a modern (although not still in production) tractor that is completely comparable to the 4020 in most areas and better in several (such as a WAY better cab, MFWD, better hitch, etc), look at a Deere 7210.

[Log in to Reply]  [No Email]
WTW

11-02-2004 12:35:30




Report to Moderator
 Re: Classic 4020 fans Question in reply to fsfs, 11-02-2004 12:18:58  
I have worked and restored many 4020 tractors in the past twenty years and work for D&C today. Let me be the first to inform you and say A John Deere 6703 is no 4020 or even close. These tractors are not even a cheap comparison and is insulting to even compare one to a 4020. Don't care what marketing line of BS the company would want you to believe. Nothing personal but take a look because I take you have not. Anybody that knows tractors / machinery can see the difference. JMHO DW

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy