Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

First time pulling 1951 B follow up and dumb quest

Welcome Guest, Log in or Register
Author 
Sharps-Nut

09-28-2004 07:03:02




Report to Moderator

I ask some questions on pulling a 1951 B about a week ago and got some good responses from Brushhog and john T thanks for the help guys. I pulled my tractor and learned alot from the experience. The shocker for me was stock tractor didn"t mean squat at this pull. Everyone was nice but all I heard was take off your rock shaft get rid of your roll a matic loose the stock air cleaner, you need a power block. What ever happen to old tractors and pulling them in a more less stock condition. Most of the people though nice walked around my tractor like it was something from mars. Some even ask your not going to pull that are you, then laughed when I said yes. This is a nice original old tractor whats wrong with pulling that? Help me understand how a pull I attended years ago has gotten so far whacked out on turning original tracors into something useless except pulling a sled. Is there anything like stock pulls anymore?

[Log in to Reply]   [No Email]
Big Yarber

09-29-2004 12:19:24




Report to Moderator
 Re: First time pulling 1951 B follow up and dumb q in reply to Sharps-Nut, 09-28-2004 07:03:02  
Hey i know the experiance. i Have a 1952 John Deere B. Me and a couple of my buddies go to all the Pulls around our area. we call ourselves the STOCK PULLERS. because we are basically the only true stock (right out of the field) pullers in our area. but dont give up. little tweaking here and there to get ur tractor running at its best is what its all about. at the end of this year i won 1st place at my local pull. outa bout 40 tractors most were not stock and most had twice as many pistons as i did =). gl next time.

[Log in to Reply]  [No Email]
Dave 2N

09-29-2004 03:32:52




Report to Moderator
 Re: First time pulling 1951 B follow up and dumb q in reply to Sharps-Nut, 09-28-2004 07:03:02  
I undersatnd what you are saying; what happened to the "I'm going to pull my grandfather's tractor against you grandfather's tractor" days? As Don Corleone said, "How did it ever come to this?" Good explanations offered below.

But, in an attempt to get back to straight stock pulling, our newly formed local group has a few pulls for stock antiques and specify that modified or enhanced tractors won't' be allowed to pull. Furthermore, we tell them that if your tractor came with it, it has to be on it to pull. If anyone wants to remove components, get a power block, etc., there are plenty of NATPA pulls for them.

And guess what? We are all having a good time!

[Log in to Reply]  [No Email]
WTW

09-28-2004 08:24:29




Report to Moderator
 Re: First time pulling 1951 B follow up and dumb q in reply to Sharps-Nut, 09-28-2004 07:03:02  
Sir, Reading your post, questions and comment stirred me a little, not in a bad way either. Actually I know exactly how you feel, been there myself. When I started pulling 25 years ago I seen and experienced the same things. Here is how I think things get the way they are: First when you call anything a contest, competition to allot of folks means I am going to win at no cost. Second, human nature in any competition is the desire to be first. Sooner or later the people running the pulls all have this perspective and you will have what you seen at the pull you attended. I have nothing against stock pulling, but do have modified antique and diesel farm pulling tractors. I started pulling with a bone stock 1940 "G" and a 1937 "A" restored very nice with good tires. I still have these tractors in there stock condition today. After going to pulls getting beat and experiencing the same things you did here is what caused me to change over: First the human nature thing, I want to win, well at least not be last in every class I pulled in, the second thing was, I was the local JD mechanic that supposed to know his stuff that owned them nice two cylinders that was always at the back of the pack. Third problem was there was no so called stock class to pull in either. The good part of this long winded message is: Today the club that drove me into building the modified tractors that I pull today has the largest and most successful "STOCK class in Eastern Iowa. People like yourself really did want this type of class and they made it happen. To say everybody likes it, would not be true, I do even though I do not pull in them. There rules are the most strict you will see right down to factory drawbars and PTO shafts and stock hitch length and heights. Been many people think they have a stock tractor show up to pull with them and have been told to pull in the mod classes or turned away. To say everybody is 100% stock I would say no because personally I don't believe they are very many out there. They draw every old tractor in the country around Dubuque Iowa to pull in these classes and would bet there class average is 25 to 30 tractors. I know for sure that the stock class tractors out number the modified tractors 4 to 1. The stock classes have gotten so large that they had to start there pulls earlier in the morning to get done before they run out of daylight. Not the most exciting thing to watch but that can apply to allot of antique pulling. The most important thing everybody participating has a good time and felt that all had a fair chance. If you would want to know more about this club I will get you an address. The association is called "Hawkeye Vintage Antique Pulling Association" It is from the Dubuque Iowa Area. DW

[Log in to Reply]  [No Email]
John T

09-28-2004 07:44:52




Report to Moderator
 Re: First time pulling 1951 B follow up and dumb q in reply to Sharps-Nut, 09-28-2004 07:03:02  
Sharps, been there done that got the T Shirt many many years ago. There was a time at our local county fair when farmers brought straight stock tractors from the field as is in in their working clothes and pulled n had cheap fun. The lil things like I mentioned in my original post of tune ups and weight balance and hitch placement and good mechanicing were acceptable and most did at least that. But then maybe pride or competition (lots just human nature) kicked in and grudges developed and some started to modify the tractors, not visibaly apparent, but things which were NOT STOCK and, of course, they won. After that it became strictly a question of how much money one was willing to throw into the tractor to win, so you had to add money or get out and afterwards there were few "stock" pullers remaining. I will never forget one IHC M puller who looked you in the eye n wore his tractor was stock, but it sat there at idle n loped like a cammed up racing engine (which it was).

There are solutions provided a group of pullers have precise and measurable rules regarding what constitutes "stock" and enforce them and want to pull that class, but it seems the excitement and crowd appeal tends to the loud smoky hot rods. There are associations that define, enforce and sponsor stock pulls and that would be the pulls and associations and fairs etc you could still compete in. However, the pulls where there are no strict measurable enforceable rules, youre prob gonna end up on the short end of the track.

Check out The Hook pulling magazine and there are web sites n chat rooms where you may get some help cuz Im sure there are still "stock" pulls but they may not be available in your area. It takes a dedicated group of hard working folks to define, sponsor and enforce a class and pull, but if thats nonexistent in your area, youre likely screwed. HOWEVER, some of the thigns you mentioned (which are legally still stock) come from experience and knowledge and YES power blocks and weight distribution and like Heisler high compression heads ect etc are still needed to win, all which take some serious bucks to accomplish.

It still depends on how much money youre willing to spend I guess, thats sort of a shame, but human nature is a big factor.

Good Luck n God Bless

John T

[Log in to Reply]  [No Email]
jacksun

09-29-2004 18:55:02




Report to Moderator
 Re: First time pulling 1951 B follow up and dumb q in reply to John T, 09-28-2004 07:44:52  
hey john t i think i know that gut with the ihc m met him at the machine shop he was having 4" sleeves from cat installed in the stock block the only thing stock about that engine was the block and that was the2nd one because the first they bored out to much for the sleeves to fit with out rubbing.



[Log in to Reply]  [No Email]
Sharps-Nut

09-29-2004 06:30:14




Report to Moderator
 Re: First time pulling 1951 B follow up and dumb q in reply to John T, 09-28-2004 07:44:52  
Thanks for all the insight. I sure got a shock last saturday. I still enjoyed it but wow. One competitor said it real nice if you want to win it takes about 10,000.00 Thats atot of cabbage when your still paying day care and diapers. I will likely go again, it was fun and a fun group of people. Still better group than most hobbies I have been invoved with. Thanks again for all the help and thoughts. Steve

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy