Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4020 aginst 4520

Welcome Guest, Log in or Register
Author 
mike

09-17-2004 14:33:30




Report to Moderator

I looked at a 4520 w cab today for 7000. why do the 4520 seem to sell for less than a 4020? If it had been a simmilar 4020 in the same shape I'd be outdoors unloading a tractor right now... jes thinking about it; mike




[Log in to Reply]   [No Email]
TB SCOTT

09-20-2004 07:35:43




Report to Moderator
 Re: 4020 aginst 4520 in reply to mike, 09-17-2004 14:33:30  
Boy check production numbers on some of these NG tractors!!! Alot of NG tractors are 10 times more rare than alot of two bangers !



[Log in to Reply]  [No Email]
Doug in IL

09-18-2004 05:32:57




Report to Moderator
 Re: 4020 aginst 4520 in reply to mike, 09-17-2004 14:33:30  
I don't think it has all that much to do with size. It's the pto speeds. The tractors larger than the 4320 and 4430 sizes had 1000 rpm only pto's. I know I have passed on a couple 4630's because of just that issue. Less demand, less money.



[Log in to Reply]  [No Email]
G-MAN

09-18-2004 07:46:18




Report to Moderator
 Re: 4020 aginst 4520 in reply to Doug in IL, 09-18-2004 05:32:57  
I think the size and 1000 rpm only issue go hand in hand, and both are a result of what the 4520 and 4620 were intended to be - large row-crop tractors designed to be the big horse on the farm. Built to pull 8-row planters, big disks, big plows, etc. They were only equipped with 1000 rpm PTOs because it just wasn't expected that they would be used for augers and baling hay, and that proved to be the case. The 4630, 4640, and succeeding large-frame Deeres were 1000-only for the same reasons. It would be a waste to have that much tractor on a job a 3020 could handle. I don't see there being a big demand for the 45/46 in the future collector-wise. They're big, heavy and a lot more money to restore or repair than a 4020, especially if you have to get into the turbocharger, replace the aftercooler, etc. Sure they were never built in numbers even beginning to approach what the 4020 was, but just about everybody wants a 4020, and that just isn't true with the 45 and 46. I personally like the 45s and 46s, and wouldn't mind owning one just because they were the big-horses of their day, and that's the sort of thing I'm in to. I'd LOVE to slap a 6466 or 6076 in a 4630 powershift.

[Log in to Reply]  [No Email]
hardscrabble

09-17-2004 19:29:04




Report to Moderator
 Re: 4020 aginst 4520 in reply to mike, 09-17-2004 14:33:30  
If you're using it, go with the 4020. But if you're collecting, grab the 4520, right now. Like the others say, there are more 4020's than there are 4520's. To me, that would make the 4520 the "rarer" of the two. And personally, I prefer the beefy look of the 4520/4620 machines. The only sharper looking machines are the 5010/5020/6030 trio.



[Log in to Reply]  [No Email]
G-MAN

09-17-2004 15:29:59




Report to Moderator
 Re: 4020 aginst 4520 in reply to mike, 09-17-2004 14:33:30  
4520s and 4620s nearly always bring less than 4020s in similar condition. Why? They're too much tractor for most guys that are looking into getting a New Gen. They have heavy front axles that are hard to adjust spacing on compared to a 4020, and the same goes on the rear-end, everything is big and heavy. A healthy 4320 will produce nearly the same horsepower without the weight and size penalty. The same phenomenon can be found in the 40-series. A nice 4440 will bring just as much or more than a similar 4640 or 4840 just about every time.

[Log in to Reply]  [No Email]
thurlow

09-17-2004 15:29:49




Report to Moderator
 Re: 4020 aginst 4520 in reply to mike, 09-17-2004 14:33:30  
Never had a 4520, but had a couple of 4620s (actually, one was my Dad's) way back when; still have 4020s. The 4020s are much "handier" tractors; 4520.....bigger, bulkier,etc. For the hobby and small acreage farmers, the 4020 is a better 'fit'. Few of the serious farmers are interested in the 4520s..... .30 year old design. Would think the market is driven by demand, hence the difference in price.....

[Log in to Reply]  [No Email]
JL

09-17-2004 16:16:46




Report to Moderator
 Re: 4020 aginst 4520 in reply to thurlow, 09-17-2004 15:29:49  
My uncle had a 4520 back in the 70's. They named it Baby Huey. Said it was big and clumsy and seemed to run-over/crush everything, like the Baby Huey cartoon (remember that one? ha) I always thought that was a good name. They told me a "smoked" 4320 could keep up and was better all around.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy