Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

320-U model # of 3-Point ? Mine'sMissing left arm

Welcome Guest, Log in or Register
Author 
Cash Moline

09-13-2004 09:32:03




Report to Moderator

Hi...have a 320-U project tractor that is missing the left rear 3-point arm. Does anyone know what model # 3-point this is, or what other model John Deere tractors would substitute out for that? I found that only the 40-U drawbar (I'm missing drawbar too) on later 40-U models after serial #62734 subsitutes for the 320-U drawbar so does someone know if the all the 40 3-points should be the same or just a particular model like the 40-U? No tag and block # is 1396 if someone can give me more info on what that means. Or price is $3,600 firm as is in so. WI> Thank you and if someone has these parts by chance let me know too. Also need a 40-V Special (semi high crop) drawbar complete unit or any tips on that. [email protected] 512-458-9575

[Log in to Reply]   [No Email]
ralph oregon

09-14-2004 13:20:13




Report to Moderator
 Re: 320-U model # of 3-Point ? Mine'sMissing left in reply to Cash Moline, 09-13-2004 09:32:03  

do you need the arm that goes to the rockshaft or the lower arm the goes to the 3-point? i have both rockshaft arms m-2414 and 2415. ralph



[Log in to Reply]  [No Email]
Wayne in Tn.

09-13-2004 12:22:27




Report to Moderator
 Re: 320-U model # of 3-Point ? Mine'sMissing left in reply to Cash Moline, 09-13-2004 09:32:03  
Cash Moline, if you are referring to the left lift arm that attaches to the implements, the part number for a 320U is AM2176T the same as a 40v and some of the 420 and 430 models. I have a 40V All-Fuel in the shop now, with all the original drawbar parts. If you want, I can e-mail you a photo of it.



[Log in to Reply]  [No Email]
Cash Moline

09-13-2004 13:46:50




Report to Moderator
 Re: 320-U model # of 3-Point ? Mine'sMissing left in reply to Wayne in Tn., 09-13-2004 12:22:27  
Thank you Wayne...my email is [email protected]

I appreciate it!

-Cash
512-458-9575



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy