Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4850 collector value?

Welcome Guest, Log in or Register
Author 
Nebraska Cowman

09-10-2004 14:20:42




Report to Moderator

I know where serial number 1001 is. Does it have any special collector value? the tractor is in salvage condition. :(




[Log in to Reply]   [No Email]
960

09-10-2004 19:20:07




Report to Moderator
 Re: 4850 collector value? in reply to Nebraska Cowman, 09-10-2004 14:20:42  
I will take the other side of the fence here. Have you noticed the values of 6030's lately. You say not the same apples. How much does a 6030 weight? Ask most 60 to 80 year old men if any of the tractors of their past would be collectable when they viewed say a 4430 for the first time. How many younger men now wish they hadn't hammered their 60's muscle car to death. My JD collection spans from a 29 GP for parades to a nice 1988 4650 mfwd with 2700 hrs that I earn a living with. With farm returns where they are I will be using the 46 well into the day it may not be a common site in the area.

[Log in to Reply]  [No Email]
G-MAN

09-11-2004 07:48:00




Report to Moderator
 Re: 4850 collector value? in reply to 960, 09-10-2004 19:20:07  
I agree with JD 5020 guy. I don't see 6030s selling for big bucks anywhere I've seen them listed. What guys are asking and what they're getting are two different things. You can buy them cheaper than an as-nice 4020 all day long. They're cheap, simple horsepower. That's also talking about running tractors, not one in salvage condition. In terms of complexity, a 4850 is three times as complicated to repair. I don't see a collector tearing into the 15-speed powershift in his barn the way he might replace some tranny bearings on his old "B". Like I said, if it was a decent working tractor, somebody would potentially buy it and fix it up nice. Starting with a salvage machine is a sure way to drop about $20,000 in it in no time. I know because I've done about everything you can do repair-wise to 50-series tractors. If they have major component problems, they get expensive in a hurry. But, if you think it's going to be a collector's item, you should jump on it, restore it and use it alongside your 4650.

[Log in to Reply]  [No Email]
JD 5020 guy

09-10-2004 20:06:45




Report to Moderator
 Re: 4850 collector value? in reply to 960, 09-10-2004 19:20:07  
I have not noticed unless it is in the GM were a lot of the prices are inflated in my opinion. 6030s sell for around $10,000 or less around here. Most of the time you can get them for the price of a 4020. Most people who buy them use them for PTO work. I do wish I still had our 4640.



[Log in to Reply]  [No Email]
G-MAN

09-10-2004 15:43:21




Report to Moderator
 Re: 4850 collector value? in reply to Nebraska Cowman, 09-10-2004 14:20:42  
There's probably little to no value as a collector's tractor, at least not right now. Guys are starting to get into the New Generations as collectors now, but it will probably be quite some time before they move up to the newer iron, if ever. Restoring a 20,000 pound 180 horsepower tractor to haul around to shows will probably never happen. It would be "worth" more as working tractor doing real work than as a parade queen. Plus it would take megabucks to restore a salvage-quality 4850 to working condition, let alone showroom condition. If it were in decent working condition, then it might add a few bucks to the "value" to say it was 4850 #1. I typed PIN RW4850P01001 into the JD service information system, and it came back as an invalid PIN number, but that might be because it's too old.

[Log in to Reply]  [No Email]
buickanddeere

09-11-2004 08:14:12




Report to Moderator
 Re: 4850 collector value? in reply to G-MAN, 09-10-2004 15:43:21  
I would have to agree. If the tractor cannot be hauled on a class III hitch behind a pickup. And squeezed into a standard auto garage. Most collectors walk right on by. If the tractor cannot be legaly hauled behind a pickup with a 5th wheel trailer. There isn't one in a 100 collectors interested in opening thier own wallet. Judgeing by the number of wiring jobs I find where a connection is 2+ bared pieces of wire. Twisted together and wrapped with various kinds of tape. The average restorer is stumped with a 24V starting system, polarizing a generator or wiring a bypass starting system. They will run away from the 1st printed circuit board they see.

[Log in to Reply]  [No Email]
G-MAN

09-11-2004 10:47:01




Report to Moderator
 Re: 4850 collector value? in reply to buickanddeere, 09-11-2004 08:14:12  
It might be collectible by a guy that already farms, and possibly owns a tractor-trailer to haul it on, but like you say, few collectors are going to go to that extent. Nothing against the 50-series, because they're darn good and darn good-looking tractors, it's just that a 4850 is too new and too big to be a "toy".



[Log in to Reply]  [No Email]
JD 5020 guy

09-10-2004 20:08:30




Report to Moderator
 Re: 4850 collector value? in reply to G-MAN, 09-10-2004 15:43:21  
I agree with you. But I bet you there is somebody out there with nothing but money that would buy this tractor, competely restore it, park it in a barn, and brag they have the first 4850 made.



[Log in to Reply]  [No Email]
Nebraska Cowman

09-10-2004 17:12:06




Report to Moderator
 Re: 4850 collector value? in reply to G-MAN, 09-10-2004 15:43:21  
I think there may have been more zeros before the 1001, I'll check next time I see the tractor and get the full number. It is the first one, Too bad it was not better taken care of.



[Log in to Reply]  [No Email]
G-MAN

09-11-2004 10:44:27




Report to Moderator
 Re: 4850 collector value? in reply to Nebraska Cowman, 09-10-2004 17:12:06  
I also entered it as RW4850P001001 with the same result - invald PIN.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy