Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

8010 - what happened in Dallas in 1960?

Welcome Guest, Log in or Register
Author 
Bettina Borst

08-29-2004 07:41:11




Report to Moderator

I'm translating a book on John Deeres into German. So I know enough about tractors, but am not a JD enthusiast in particular - so, sorry for asking what any earnest fan probably knows anyway: My author writes that in 1959, the new 8010 was announced on the British Isles. Now his next sentence is: "8010 was a strange number to digest until the happenings at Dalls the following year."
What happened in Dallas in 1960 that had a connection to the 8010 ??? Thanks !!!

[Log in to Reply]   [No Email]
Bettina Borst

08-30-2004 12:11:34




Report to Moderator
 Re: 8010 - thank you, everybody! in reply to Bettina Borst, 08-29-2004 07:41:11  
Thanks for answering, folks! Internet is just great.
So, as I understand it, everybody thought that calling a JD model 8010 was somewhat strange, but then model designations such as 1010, 2010 and so on came up and everybody got used to this new way of numbering John Deeres - is it that?

Thanks again,
Bettina



[Log in to Reply]  [No Email]
F-I-T

08-30-2004 19:55:28




Report to Moderator
 Re: 8010 - thank you, everybody! in reply to Bettina Borst, 08-30-2004 12:11:34  
Bettina:

I think you have it just fine. When news of that 8010 made its way around the midwest region of the United States, many old timers like my Dad and Uncles thought it was just something to compete with Caterpillar"s large track tractors, and in fact my one uncle said it was probably being built to do earth moving on the new interstate highway system. When the "new" -10 series models came out, even our local dealer was almost embarassed and frightened that he would lose his trade as now a John Deere wasn"t anything special. He was wrong.

I think there was more fanfare in 1972 with the introduction of the -30 series tractors. They shipped them either in covered rail cars or fully wrapped until the last Saturday in August of 1972, when they were officially unveiled coast to coast. They unwrapped a 4230 at our county fair, marching band and all, and with that new Sound Guard body, they stole the show.

Frank

[Log in to Reply]  [No Email]
STan - Florida

08-31-2004 17:56:16




Report to Moderator
 Re: 8010 - thank you, everybody! in reply to F-I-T, 08-30-2004 19:55:28  
And a pretty reliable rumor has it that Ertl came out with the toy 4430 before the real things came out. So much for corporate secrecy, eh?

Stan



[Log in to Reply]  [No Email]
Tyler-MO

08-29-2004 12:28:09




Report to Moderator
 F�r was Gr�nde �bersetzen Sie das Buch?? in reply to Bettina Borst, 08-29-2004 07:41:11  
Bettina,

I am interested in your purposes of translation of the book? I am attending Southeast Missouri State University and am studying Agriculture and German as major subjects. I will attend Friedrich Sch�ller Universit�t in Jena, Deutschland next spring to complete my degree in German. While there I hope to see a great deal of agriculture.

Anything relating to German really interests me...so that is why I ask. Are you in Germany or where??? I did not realize that Germans were interested in John Deere tractors?
Herzlich Danken!

LG

Tyler Buchheit

[Log in to Reply]  [No Email]
Bettina Borst

08-30-2004 11:58:46




Report to Moderator
 Re: F�r was Gr�nde �bersetzen Sie das Buch?? in reply to Tyler-MO, 08-29-2004 12:28:09  
Hello Tyler,

I am based in Germany, near Nuremberg, and I"m being paid by a publishing house for doing the translation.
I am both an agricultural engineer and a state-approved translator, which is why I qualify for translating the book.
There are a lot of John Deeres in Germany, and quite some people are interested in not-quite-up-to-date machinery.

If you want to contact me directly:
[email protected]

All the best,
Bettina

[Log in to Reply]  [No Email]
msb

08-29-2004 12:23:31




Report to Moderator
 Re: 8010 - what happened in Dallas in 1960? in reply to Bettina Borst, 08-29-2004 07:41:11  
The 8010 was drivn into the arena hauling a new 1010 model on the 8010s hitch as I recall.



[Log in to Reply]  [No Email]
hondo

08-29-2004 11:16:05




Report to Moderator
 Re: 8010 - what happened in Dallas in 1960? in reply to Bettina Borst, 08-29-2004 07:41:11  
Bettina,

Thanks for asking an interesting question...I bet there were a lot of us who didn"t know the answer to that! Good luck on your book!



[Log in to Reply]  [No Email]
Nameless-in-Tallahassee

08-29-2004 08:24:10




Report to Moderator
 Re: 8010 - what happened in Dallas in 1960? in reply to Bettina Borst, 08-29-2004 07:41:11  
Bettina:

In 1961, the "New Genration of Power" was introduced to the nationwide US dealers at a convention in Dallas, TX. (Deere Day in Dallas).

At that time the new 4 and 6 cylinder engined tractors were introduced, preplacing the venerable two-cylinder models, which ended with the 30 series (-40 for industrial).

So, when the 8010 was being demonstrated at farm show venues in "59 and 60, the series number was cunfusing to people until they saw the new 1010, 2010, 3010, and 4010 when they were intriduced in Dallas.

Frank

[Log in to Reply]  [No Email]
Nameless in Tallahassee

08-29-2004 10:36:08




Report to Moderator
 Re: 8010 - what happened in Dallas in 1960? in reply to Nameless-in-Tallahassee, 08-29-2004 08:24:10  
Please excuse my awful speeling errors. I DO need to use my glasses first thing in the morning!

Frank



[Log in to Reply]  [No Email]
buickanddeere

08-29-2004 20:54:05




Report to Moderator
 Big Clue, how did they miss it ??? 8010 - what ha in reply to Nameless in Tallahassee, 08-29-2004 10:36:08  
How did everyone who seen the massive 8010 a year or two before the end of two cylinder era. Get caught so flat footed and suprised by the new 10 series? for the 1961 model year? I suprised with Deere and it"s super secret New Generation program letting the "cat out of the bag" with a 6 cylinder 8010?



[Log in to Reply]  [No Email]
Larry L. Helmer

08-30-2004 19:06:45




Report to Moderator
 Re: Big Clue, how did they miss it ??? 8010 - wha in reply to buickanddeere, 08-29-2004 20:54:05  
Weren't the revolutionary 10 series introduced as 1961 models in the fall of 1960?

You have to realize that at that time, all of us faithful JD users couldn't imagine Father Deere "copying" all of the enemies by using 4 or 6 cylinder engines, even though the rumors were wide spread and pictures of the 8010 were displayed.

We didn't think anything could last like the old dependable two cylinder models.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy