Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

#5 mower hookup to a 2010

Welcome Guest, Log in or Register
Author 
Bill in SWIowa

08-11-2004 13:09:01




Report to Moderator

I have just bought a #5 sickle mower with a quick attach hook up. I'm not sure how to go about putting the bracket on that goes on the tractor. I have a 2010 with a three point hitch. Do I need to take the arms off the three point? Any help would be much appreciated, thanks. Bill




[Log in to Reply]   [No Email]
Thane

08-12-2004 09:39:57




Report to Moderator
 Re: #5 mower hookup to a 2010 in reply to Bill in SWIowa, 08-11-2004 13:09:01  
This link might help you.

Link



[Log in to Reply]  [No Email]
Jake

08-11-2004 21:27:03




Report to Moderator
 Re: #5 mower hookup to a 2010 in reply to Bill in SWIowa, 08-11-2004 13:09:01  
Look in the parts book or operator"s manual for a John Deere No.38 mower, it shows the special mounting brackets that will also work for your No.5 mower on that tractor.

I have part of the mount brackets that I think is for that tractor. I have no use for them at this time and can sell them, however we"d have to find or make the parts that are missing.

The bracket parts I have look like a two-piece adjustable version instead of a one-piece like is shown in my No.38 mower book. Different printings of the operator"s manual may show different versions of these brackets. I think the parts book at the JD dealer shows more mount brackets than my op manual does.

[Log in to Reply]  [No Email]
Jon C -Florida

08-11-2004 17:54:46




Report to Moderator
 Re: #5 mower hookup to a 2010 in reply to Bill in SWIowa, 08-11-2004 13:09:01  
Bill -
I have a number 5 mower that is connected to the side of my drawbar hitch (on an "A"), with two clamps. The clamps go around a pin about 2 inches in diameter and the pin is connected to an angle that is bolted to the side of the drawbar.

The dolly, or caster wheel carries the back weight of the mower.

The no. 5 will fit many machines including crawlers and JD "R"'s. But I am not familiar with connecting to the three point hitch at all.

Doesn't mean it can't be done...I just haven't seen it and cant find it in the manual for the no. 5.

My guess is that you may want to take the arms off, and connect the brackets to the side of the drawbar hitchpoint. Let me know if you would like any pictures of my hitch if you decide to go that way.

The pics, if you want them, may have to wait till this hurricane blows by, as I just got in from tying down everything.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy