Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

730 diesel shift lever

Welcome Guest, Log in or Register
Author 
gary

02-02-2004 07:07:32




Report to Moderator

i have a 730 diesel that likes to pop the shift lever out of the shift rail in the transmission. this past summer, my son, whom was not very versed on the tractor, was going to back up, and all he had was forward gears. we took the top off the transmission, reset the shifter, and off we went. a few days later, it happened again. at that time we replaced the ball and socket on the top of the shift lever, as we thought there might be some wear there. it has also been suggested that when my son could not get it into reverse, that he may have broken a shift fork, or bent the lever. i went out to move snow this morning, and was going down the road in 6th, and when i got to the place i was going, tried to go to reverse, and am stuck in 3rd, so it happened again. what am i missing or is there something esle i need to be looking at for wear and tear? thanks,, Gary

[Log in to Reply]   [No Email]
Clooney

02-02-2004 09:00:41




Report to Moderator
 Re: 730 diesel shift lever in reply to gary, 02-02-2004 07:07:32  
Gary, I believe we will need a little more information to be able to help you very much.. You already did the obvious..

~We have to know if it always happens in the same gear?

If always happens on the same side of the shift quadrant?

If the shift lever actually moves out of the shift quadrant slot or if it just seems disconnected when you go to move the lever?

If you can move the shift lever into another gear or does it stay stuck in the one it�s in when the problem occurs?

If the shift lever doesn�t feel like it�s connected to anything when you move it after the problem happens?

~Anything more you can add..

~What we are trying to figure out here is what shift rail is causing the problem & if the problem is the rail moving during use or becoming disconnected at the time the lever is moved to shift?

[email protected]

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy