Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

3010 clutch aligning tool

Welcome Guest, Log in or Register
Author 
EJB

07-21-2004 07:46:08




Report to Moderator

I'm replacing the clutch disk on my 3010. My dealer can't get me the clutch aligning tool or the clutch adjusting gauge to get the release levers all even. Does anyone know any tricks I could use to do it right without these tools? Thanks in advance.




[Log in to Reply]   [No Email]
thurlow

07-21-2004 16:10:38




Report to Moderator
 Re: 3010 clutch aligning tool in reply to EJB, 07-21-2004 07:46:08  
My experience; your's may be different. Don't know if you can set the fingers without a gauge; I traced the dealers and made my own. Have never used (or needed) clutch aligning tool (10 and 20 series); have always just centered the disc by "eyeballing" it..... .....



[Log in to Reply]  [No Email]
Mike M

07-21-2004 10:50:53




Report to Moderator
 Re: 3010 clutch aligning tool in reply to EJB, 07-21-2004 07:46:08  
How does your dealer do them ?? If they have one you should be able to trace it for a pattern. That's how I got one. I made an alignment tool per the specs. in the I&T manual and it worked fine. Don't put it together without these.



[Log in to Reply]  [No Email]
ET

07-21-2004 09:23:11




Report to Moderator
 Re: 3010 clutch aligning tool in reply to EJB, 07-21-2004 07:46:08  
Go to an auto parts store and buy a universal clutch aligning tool. I've been using one for years on 3010's and 4020's.



[Log in to Reply]  [No Email]
Bob

07-21-2004 07:50:36




Report to Moderator
 Re: 3010 clutch aligning tool in reply to EJB, 07-21-2004 07:46:08  
Gottcha covered! There's a guy on ebay selling reproductions of the clutch finger adjusting guide.

Link



[Log in to Reply]  [No Email]
Jake

07-22-2004 21:02:57




Report to Moderator
 Re: Re: 3010 clutch aligning tool in reply to Bob, 07-21-2004 07:50:36  
Well, that's nice they are offering a replacement clutch too. Wonder if anyone told them they can mail it in a priority mail flat-rate envelope for $3.85 instead of $8 shipping and "handling".

Guess I'll have to start making them. I have one for a pattern!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy