Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

4010 hyd pump JD or Worthington?

Welcome Guest, Log in or Register
Author 
gwece

07-17-2004 06:41:38




Report to Moderator

The hydraulic pump out of my 4010 is shot according to local Deere dealer. They want $1400 for a reman unit. Would I be better off with a pump from Worthington or someone else?...looks like they are a lot cheaper. If so, how do I tell which pump I have. Worthington shows 3 different ones for a 4010 in their catalog: An early model "upside down" compensator housing, a 50cm small port, and a 40 cm serial numbered port. (I'd like to get something that will go back in the tractor without having to plumb up any additonal lines.) Any advice is appreciated!

[Log in to Reply]   [No Email]
Brad

07-17-2004 14:14:07




Report to Moderator
 Re: 4010 hyd pump JD or Worthington? in reply to gwece, 07-17-2004 06:41:38  
I had to replace mine in a 3010. Was looking at Worthington too. Dealer wanted $100 more and when I mentioned their price Jd Dealer came down the $100. Was less money from JD Dealer in the end because I did not have to pay shipping from Worthington. A word of caution be sure to check ALL the port plugs and make sure they are tight before you install the pump. A lesson I learned.



[Log in to Reply]  [No Email]
Bob

07-17-2004 09:24:51




Report to Moderator
 Re: 4010 hyd pump JD or Worthington? in reply to gwece, 07-17-2004 06:41:38  
jdparts lists 2 pumps for the 4010, depeneding on serial number. $1330 for the smaller, earlier pump, and $1440 for the newer series, larger pump. As far as I know, these pumps are NEW, not re-man. There are some fittings and "O" rings listed, also, probably less than $50.00.

As much work is it is to get at that pump, if it were my tractor, and I intended to keep it, and use it, I would try to afford the new pump. And, yes, that is what I did on my own 4020 several years ago when my pump began to leak from a crack in the housing.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy