Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

1950 Deere R value

Welcome Guest, Log in or Register
Author 
Nicholas Reed

06-16-2004 20:02:58




Report to Moderator

I'm not trying to advertise here, so, no flames please. I am trying to put a value on my R and seem to be having no luck. The big motor has a fresh rebuild with less than 2 hours on it. The pony needs assembled and all parts have already been bought for it. I made a custom electric start system for it and it starts and runs great. Pics can be seen at Link I just need to know what it is worth because I may not sell it if I am going to go in the hole too much. Thanks

[Log in to Reply]   [No Email]
720Deere

06-17-2004 05:03:49




Report to Moderator
 Re: 1950 Deere R value in reply to Nicholas Reed, 06-16-2004 20:02:58  
Nicholas,

I've seen your R and while the electric start is pretty ingenious, it kills the value. Maybe somewhere on that web link with the pictures you could post a list of all the parts that you have for the pony motor. I'm going to go out on a limb here and tell you that if you have rebuilt the big motor to spec, then you probably will never recoup the money that you have into it. If it was just a ring job then that's a different story.

From the looks of the pictures and the unknown of the pony motor, I would guess that $2500 to $3000 is probably going to be a stretch. Unfortunately the rebuild has no value to most people as that can mean many different things to different people. Usually, if the motor has been rebuilt to sell you end up spending just as much money to restore it as you would if it hadn't been touched. Hopefully, you have alot of documentation to prove what you have done and it's value.

Good luck selling that R, but I would bet that you'll find it to be a keeper.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy