Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Cultivator identification

Welcome Guest, Log in or Register
Author 
Mark Scholten

06-07-2004 04:10:29




Report to Moderator

I have a 2 row mounted cultivator on my 1952 "B". Does anyone know what model this cultivator is? It has spring teeth and shields. Also full rear spring teeth.
Thanks, Mark




[Log in to Reply]   [No Email]
Mark Scholten

06-08-2004 04:31:59




Report to Moderator
 Re: Cultivator identification in reply to Mark Scholten, 06-07-2004 04:10:29  
Boy, I sure am glad that Stan and Mike live far enough apart. Anyways, you all have offered plenty of info. No nubbin, quicktach, hanging sheilds, makes it a model 200 as CMB stated. Thanks for the info.
Now Mike, you should run front weights when pulling, not a mounted cultivator to keep the front end on the ground.
Mark



[Log in to Reply]  [No Email]
Stan - Florida

06-16-2004 06:08:47




Report to Moderator
 Re: Re: Cultivator identification in reply to Mark Scholten, 06-08-2004 04:31:59  
Mark,

Mike and I could potentially now be neighbors without fighting...I found a brochure from May 1947 that verified what he had said. I dropped him an apology near the bottom of this thread...I guess my mind has turned to mush, eh?

The brochure I was referring to earlier was from the mid-'50s.

Best regards,

Stan Huff
Melbourne, FL



[Log in to Reply]  [No Email]
Mike Aylward

06-07-2004 10:38:31




Report to Moderator
 Re: Cultivator identification in reply to Mark Scholten, 06-07-2004 04:10:29  
Mark, odds are it is a model 200 cultivator. A later model 20 is similar with the exception of having a locator hole in the top center of the front frame for a "spud" that bolts on the front of the tractor, similar to what is bolted to the side frames. The 200 cultivator does not have this locator which is why you see many A's and B's with grooves cut in the front pedestal. Also, the 200 cultivator shields are mounted on the frame and are suspended with chains where the later 20 series cultivator has rig-mounted shields. Hope this helps. Mike

[Log in to Reply]  [No Email]
Stan - Florida

06-07-2004 11:26:54




Report to Moderator
 Re: Re: Cultivator identification in reply to Mike Aylward, 06-07-2004 10:38:31  
Mike,

I remember our '49 "A" and '52 "B" with the mounting "spud" on the center of the front pedestal...what a great improvement over manhandling the cultivator on our '43 "B"!! In looking at my literature pile, I find a brochure for the No. 200 and No. 400 Quik-Tatch cultivators (dated Sept. 1953) with this same mounting system. Also shows the chain adjusted shields that you mentioned.

I also found a couple of pages in a later brochure (November 1959) that do indeed show the "spud" you mention.

Has my memory turned to mush regarding the "A" and "B" we had?

Stan

[Log in to Reply]  [No Email]
Mike Aylward

06-07-2004 14:11:54




Report to Moderator
 Re: Re: Re: Cultivator identification in reply to Stan - Florida, 06-07-2004 11:26:54  
Stan, it would be my guess that the cultivator you mention might have been converted afterwards or done at the dealer's with four-row parts. This was sometimes done to eliminate the groove that was made with a flexing two-row. But the four-row cultivators, whether they are 400's or the later 40's always had this locator on the top of the mast. All my literature mentions this piece only on the later 20 series cultivators. Mike

[Log in to Reply]  [No Email]
Stan - Florida

06-07-2004 16:33:19




Report to Moderator
 Re: Re: Re: Re: Cultivator identification in reply to Mike Aylward, 06-07-2004 14:11:54  
Mike,

As our late President Reagan began, "Well", the cultivators we had on the A and the B were Quik-Tatch, they did have the "locator" piece that bolted onto the two cap screws at the upper end of the pedestal. They were both two-row cultivators, and they looked just like the ones in the literature I mentioned before.

I don't want to get into a pi$$ing contest here, but I did have a lot of years on both of them, I do know what we used and I do know what I saw in the literature.

Stan

[Log in to Reply]  [No Email]
Mike Aylward-followup

06-07-2004 17:55:40




Report to Moderator
 Re: Re: Re: Re: Re: Cultivator identification in reply to Stan - Florida, 06-07-2004 16:33:19  
Stan, after doing some research in my books it appears that the 200 cultivators for the 50's and 60's did indeed come with the "nub" up front. Perhaps the cultivator you remember was slightly newer. Mike



[Log in to Reply]  [No Email]
Stan - Florida --Apologie

06-16-2004 06:04:45




Report to Moderator
 Re: Re: Re: Re: Re: Re: Cultivator identification in reply to Mike Aylward-followup, 06-07-2004 17:55:40  
Mike,

As you knew all along, you were absolutely right about the mounting locator on the front of tractors for the Quik-Tatch cultivator.

I got to looking through a sales brochure from May 1947, and the B with 2 row cultivator did not have the locator. The A with 4 row cultivator did indeed have the locator, as you had mentioned in one of your posts.

So, our '49 A and '52 B (with 2-row cultivators) did not have the locator. As I said in one of my posts, maybe my mind has turned to mush...it's been almost 50 years since I ran either one of those tractors.

Please accept my apology,

Stan Huff
Melbourne, FL

[Log in to Reply]  [No Email]
Stan - Florida

06-07-2004 18:15:35




Report to Moderator
 Re: Re: Re: Re: Re: Re: Cultivator identification in reply to Mike Aylward-followup, 06-07-2004 17:55:40  
Mike,

Well, I doubt if what I remember is from later. We got the '49 A in the fall of '49, and it came with the Quik-Tatch cultivator, as did the '52 B that we bought used in '56.

The last year I worked on Dad's farm was '56. I don't remember the model number of the cultivator.

It's not worth worrying about.

Stan



[Log in to Reply]  [No Email]
Mike Aylward

06-07-2004 17:25:01




Report to Moderator
 Re: Re: Re: Re: Re: Cultivator identification in reply to Stan - Florida, 06-07-2004 16:33:19  
Stan, neither do I want to cause any trouble. Not saying you didn't have what you did. I, too, have put many an hour on a 200 series cultivator. In fact, it was the first piece of equipment I owned. I had it even before I had a tractor to put it on. Sometimes what is "out there" and what is in the books is different. Just reporting what my literature says- that's all. No damage done here. Mike

[Log in to Reply]  [No Email]
CMB

06-07-2004 05:06:41




Report to Moderator
 Re: Cultivator identification in reply to Mark Scholten, 06-07-2004 04:10:29  
I believe a Model "200" is correct for a late "B". There might be a decal, or stencil, or the remains of one, somewhere on the main cross beams.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy