Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Four bolt B's

Welcome Guest, Log in or Register
Author 
James

01-28-2004 13:48:00




Report to Moderator

There was a post back a couple of days ago about these tractors. Well I will have to verify this but, I looked at a VERY rough ser # 1348 B, but it had the 8 bolt front with four of the bolts missing. Now does this mean the front was replaced with the later pedestal, Would that work? I know that will hurt the value, but how much?




[Log in to Reply]   [No Email]
Dwayne

01-28-2004 19:03:44




Report to Moderator
 Re: Four bolt B's in reply to James, 01-28-2004 13:48:00  
It does hurt the value, how much, I wouldn't know. if it were mine, it would have to have the correct front post. and you will find that anyone that is going to pay the big bucks would want it correct. The last 4 bolt pedistal that I saw sell brought $2500 for just the pedistal. what I would do it buy the one that is listed in the picture ads in Ill. and take the front pedistal off and put it on the earlier center fill tractor, then sell what is left over. What wheels did it have? I like most other collectors would also be interested if you are not so feel free to email me. [email protected]

[Log in to Reply]  [No Email]
BMAN

01-28-2004 15:17:49




Report to Moderator
 Re: Four bolt B's in reply to James, 01-28-2004 13:48:00  
It was common to break the 4 bolt pedestal and therefore replace it with an 8 bolt. Hard to say how much value is lost but 4 bolt pedestals are hard to come by. If you decide you are not interested in this B would you send me an email? Thanks [email protected]



[Log in to Reply]  [No Email]
Deere Heaven

01-28-2004 13:53:11




Report to Moderator
 Re: Four bolt B's in reply to James, 01-28-2004 13:48:00  
I would have to say, that the front pedestal has been updated to the eight bolt style. I am sure it will take away some of the value, but not all because its the serial number that counts. Brian Nielsen



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy