Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

For Greg S Power Trol Info

Welcome Guest, Log in or Register
Author 
Greg F

06-01-2004 10:10:01




Report to Moderator

I saw your post a few pages down and wanted to touch base with you. I my tractor is a 41 Model A and it has the same identical problem as yours. I am in the Navy and have not had all that much time to work on or trouble-shoot but I can tell you the plugs you need are the open ended ones. Clooney has a great picture of them you can email him at [email protected] I am sure he would send it to you. He may even post it again. I searched for it here but came up empty. I am like you though I think it is in the pump. I do have a power lift I am planning on trying out on mine this July so maybe that will narrow my problem down a little more. If you do find out anything please let me know. I will post anything more I find and you please do the same.

[Log in to Reply]   [No Email]
Greg S

06-02-2004 14:19:41




Report to Moderator
 Re: For Greg S Power Trol Info in reply to Greg F, 06-01-2004 10:10:01  
Hi Greg,

Thanks for the info. Had an internet access problem until today, so just now found your post.

I thought I had all the books that Deere had to offer on the B, but it turns out that they also offer a service manual dedicated just to the tractor hydraulics. It was ordered today from Deere Archives. Think it was SM2011 (?).

One of the reasons for waiting for the manual is that the Parts Manual does not show any gaskets for the pump covers. This doesn't seem right, and hopefully the hydraulic manual will shed some light on this. I almost expect to find that the pump gears are missing at this point.

Did you by any chance get to look at the link by Tod? It has a very nice diagram of what all the check valves, levers, and adjustment screws are for. This is also where I found out about the Deere Service Manual just for hydraulics.

Greg

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy