Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

420 Crawler

Welcome Guest, Log in or Register
Author 
Tim Robbins

04-24-2004 17:30:00




Report to Moderator

I have a 420 crawler, just got it. Runs like a champ but having problems with the tranny, or something.

First bought it, wouldn't turn right intermittently. Cleaned and repaired the right steering clutches and had the main clucth/pressure plate/throw out bearing done.

Now, it intermittently won't turn left and sometimes, when pushing a load or pulling something in reverse, both tracks will sit and it seems like the tranny will slip. Dad says he can hear a growl when it slips, he thinks in the tranny.

It has a five speed tranny w/reverese, and a direction reverser. The serial number is 130611. Two cylinder gas (runs great.

Anyone who can provide assistance, what to look for, etc, would be greatly appreciated. We are considering yanking the drive train apart to start looking, but would like to narrow our focus if possible.

Thanks again, TIM

[Log in to Reply]   [No Email]
HAVVEY

04-24-2004 19:42:47




Report to Moderator
 Re: 420 Crawler in reply to Tim Robbins, 04-24-2004 17:30:00  
BARRING ASIDE THE REVERSER THE MAIN CLUTCH IS OUT OF ADJUSTMENT SLIPPING BEEN THERE DONE THAT!



[Log in to Reply]  [No Email]
Russ

04-25-2004 12:38:15




Report to Moderator
 Re: Re: 420 Crawler in reply to HAVVEY, 04-24-2004 19:42:47  
420 Crawler; We had one of those and it worked very well for over 30 years. Every year it did skidding of pulpwood and logs out in the woods.
It pushed back the big snow banks in Upper Michigan in mid-winter.
Changing lubricants and replacing the track rails was about the only work we ever did on it.
The dozer blade float feature gave out toward the end. That is a very capable machine. Good luck in your adjustment and repairs.

[Log in to Reply]  [No Email]
tim_robbins

04-24-2004 20:07:25




Report to Moderator
 Re: Re: 420 Crawler in reply to HAVVEY, 04-24-2004 19:42:47  
Thanks for the quick response. Called dad, he's 2 1/2 hours away from me. He put the new clutch/pressure plate/throw out in. He did not check the adjustment as you are stating. I purchased a service manual today. When it comes in we are going to check the adjustments. Thanks, and any other advise is welcome.

TIM



[Log in to Reply]  [No Email]
HAVVEY

04-24-2004 20:15:27




Report to Moderator
 Re: Re: Re: 420 Crawler in reply to tim_robbins, 04-24-2004 20:07:25  
THAT WAS A PROBLEM WITH 40/420 THERE WAS A SPECIAL TOOL GAUGE USED ALSO



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy