Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Converting Pony to electric start

Welcome Guest, Log in or Register
Author 
Steve T.

04-24-2004 16:47:12




Report to Moderator

Have a 720 with pony start..beenhaving problems with the pony and thinkning about just converting to electric start....a few questions...what does electric start kit cost, will this hurt the value...pony could always be put back on if I ever sold it. Any thoughts?




[Log in to Reply]   [No Email]
Soldier Tom

04-25-2004 13:41:04




Report to Moderator
 Re: Converting Pony to electric start in reply to Steve T., 04-24-2004 16:47:12  
My brother has tore down our pony to little bitty pieces. It had eaten two of it's cylinders so there were plenty of little bitty pieces to go around. Steve at C&L Tractor found us a nice pony all dolled up and ready to rock for the price range yall are talking about here. I must agree, the pony start is my preference. (Heck just getting started is half the fun!)
Anyway, that's my opinion
~Walk in peace~
Soldier Tom

[Log in to Reply]  [No Email]
gene

04-24-2004 21:53:42




Report to Moderator
 Re: Converting Pony to electric start in reply to Steve T., 04-24-2004 16:47:12  
i am agreement with TIP i would fix the pony. first being a 70. since that is the series i collect it WOULD diffently hurt the value of the tractor if i was lookin at it. second if you have never had one of the dang 24 volt systems they are a pain in the butt if you ask me. a good pony will start it just as nice as any electric start. i just overhauled my pony in my 80 spent are 700. to convert it electric start the correct way it is goin to cost you more then that. just my 2 cents worth
johndeeregene

[Log in to Reply]  [No Email]
billyiron

04-24-2004 19:45:25




Report to Moderator
 Re: Converting Pony to electric start in reply to Steve T., 04-24-2004 16:47:12  
I did it to my 70 , but we have lots of stuff laying around here so it wasnt a factor of cost ,, more or less I just got a wild hair and did it, I made a bracket, and used a 12 volt starter from a IHC 466 engine, I use 2 batteries, one in the seat and one in pony engine compartment, it starts easy even down to 35 degrees, my pony needed overhaul, blew oil something fierce ,,the conversion plates Ive seen are 200.00 or so;; there was one from a 730 on ebay went for 201.00 ;;; I guess its up to you, if it was a show tractor fix the pony, if you use it and start and shut off often the electric is better,, I used a 1 wire alternator also,, youll need to change a bunch of wireing too,,,my long winded cheap advice;;;;;billyiron

[Log in to Reply]  [No Email]
dell isam

10-14-2004 20:21:43




Report to Moderator
 Re: Re: Converting Pony to electric start in reply to billyiron, 04-24-2004 19:45:25  
billyiron can you let me know what all you did to convert pony to electrics starter. have a 56 jd 70 want to convert to electric start



[Log in to Reply]  [No Email]
dell isam

10-14-2004 20:20:23




Report to Moderator
 Re: Re: Converting Pony to electric start in reply to billyiron, 04-24-2004 19:45:25  
billyiron can you let me know what all you did to convert pony to electrics starter. have a 56 jd 70 want to convert to electric start



[Log in to Reply]  [No Email]
F-I-T

04-24-2004 17:20:37




Report to Moderator
 Re: Converting Pony to electric start in reply to Steve T., 04-24-2004 16:47:12  
Steve:

I'm partial to properly operating pony starts, but that said, there is a substantial cost in finding a starter, buying/fabricating a bracket, maybe installing a larger battery box, and then finding the generator, wiring, cables, and some gutsy batteries.

What sort of trouble is the pony having? If it is mechanically sound, you can go through the carburetor for under $50, and renew the distributor/wires/plugs for under $200, and everything will be new.

I'm pretty sure you can't convert it for that.

Frank

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy