Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

2510 At auction last weekend

Welcome Guest, Log in or Register
Author 
Paul Butler

04-21-2004 06:41:03




Report to Moderator

Pretty little tractor-had been repainted and a couple wrinkles but not bad. Was missing tach/hour meter. Front tires new, rear tires 50%.

It ended up selling for $2,450.

I really wanted it-really wanted it...but there were a couple problems that kept me from bidding. #1-the seller was not there to represent it.

#2-I could not get the PTO to stop turning-even with the clutch in. I couldn't find anything to turn it on or off-what was I missing?

#3-We could not get the 3pt to go down-period. I am 99% sure the large lever to the left of the seat should operate the 3pt.

Between the PTO and 3pt I was afraid of ending up with a $2500 tractor and a $2500 repair bill.

What do you guys think, did I miss a good deal or were those problems most likely real?

[Log in to Reply]   [No Email]
John in IN

04-22-2004 10:18:32




Report to Moderator
 Re: 2510 At auction last weekend in reply to Paul Butler, 04-21-2004 06:41:03  
Paul, sounds to me like you were caught with your hands in your pockets, or just not really committed to having a JD 2510! Even if the worst case scenario you mentioned played out (i.e. $2500 tractor and $2500 repair bill), which was not likely, you would still have less in it than what a decent 2510 brings around here!! I agree with Doug in IL's assessment.

(You asked!)



[Log in to Reply]  [No Email]
Doug in IL

04-21-2004 08:44:55




Report to Moderator
 Re: 2510 At auction last weekend in reply to Paul Butler, 04-21-2004 06:41:03  
I would have bought it in a heartbeat! That is less than half of what a fairly good one will bring around here. I have a 2510 and it's a wonderful little tractor. The lever to operate the 3 point is on the dash on a 2510. Pushing in the foot clutch on a 2510 has no effect on the pto at all. The pto clutch lever is on the right side of the dash cowl. A lot of these tractors will continue to turn the pto shaft due to dragging or warped clutch plates. Not really a big deal. We should probably be attaching pto shafts with the engine not running anyway. Once there is a load on the pto, they usually will shut off ok.

[Log in to Reply]  [No Email]
stew

04-21-2004 07:38:25




Report to Moderator
 Re: 2510 At auction last weekend in reply to Paul Butler, 04-21-2004 06:41:03  
as far as the 3 pt ,,, sometimes the rate-of-drop agjustment gets turned too far and the 3 pt arms will not drop without any weight on them.



[Log in to Reply]  [No Email]
Paul Butler

04-21-2004 07:45:20




Report to Moderator
 Re: Re: 2510 At auction last weekend in reply to stew, 04-21-2004 07:38:25  
How about a 230lb guy standing on it. :)



[Log in to Reply]  [No Email]
mwo

04-21-2004 07:06:51




Report to Moderator
 Re: 2510 At auction last weekend in reply to Paul Butler, 04-21-2004 06:41:03  
good job, I would have looked the other way



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy