Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

420u???

Welcome Guest, Log in or Register
Author 
Brandon

01-25-2004 18:12:50




Report to Moderator

I JUST PURCHASED A 420 JOHN DEERE. IT DOESNT HAVE A SERIAL # TAG. IS THERE ANY OTHER #'S I CAN FIND TO GET ANY INFO ON MY TRACTOR? IS THERE ANYWAY TO FIND OUT THE SERIAL # ? EVERYWHERE THE PAINT IS CHIPPED OR MISSING THE TRACTOR IS YELLOW, DOES THIS MEAN IT IS A UTILITY? IT HAS A ROUND TUBE,WIDE FRONT. ALSO THE BRAKE LININGS SEEM TO BE INSIDE THE AXLE HOUSINGS. ANY HELP APPRECIATED!




[Log in to Reply]   [No Email]
Mark

01-26-2004 14:11:03




Report to Moderator
 Re: 420u??? in reply to Brandon, 01-25-2004 18:12:50  
That serial# on the engine is stamped on a flat area just below and ahead of the generator.



[Log in to Reply]  [No Email]
Mel

01-25-2004 21:09:28




Report to Moderator
 Re: 420u??? in reply to Brandon, 01-25-2004 18:12:50  
Brandon, there is a number stamped on the engine. It is located on the right hand side as your sitting on it, near the radiator. I think its part of the govenor housing. They are hard to make out. Your JD service department will give you a form to fill out and send back to them. They will search the records of the engine numbers and make a new serial tag for you. It's not like the original but the number is the original one. They will do this at no cost to you. They even came out and put mine on .

[Log in to Reply]  [No Email]
Brandon

01-26-2004 15:35:37




Report to Moderator
 Re: Re: 420u??? in reply to Mel, 01-25-2004 21:09:28  
Thank you guys for all the ideas and comments. Soon as i can i will check this stuff out! I appreciate the help. This is a great site!



[Log in to Reply]  [No Email]
buickanddeere

01-25-2004 19:40:21




Report to Moderator
 Re: 420u??? in reply to Brandon, 01-25-2004 18:12:50  
Try the left side and upper left of the "clutch belhousing to see if the holes are still there for the serial # plate. Just confirm that's were the plate was. The transmission, does the shifter have "gates" or just a shifter stick? Is the steering wheel slanted or straight-up? How many bolts hold the starter on? Equiped with power steering? There should be some numbers stamped on the engine block, right side back near the belhousing.

[Log in to Reply]  [No Email]
BRANDON

01-26-2004 15:46:37




Report to Moderator
 Re: Re: 420u??? in reply to buickanddeere, 01-25-2004 19:40:21  
THE TRACTOR HAS THE PLACE FOR A TAG, IT HAS THE STRAIGHT UP STEERING WHEEL, IT DOESNT HAVE POWER STEERING, IT DOESNT HAVE THE SHIFTING GATES, BUT HAS THE HOLES TO MOUNT THEM. DONT KNOW ABOUT THE STARTER. I WILL CHECK THE NUMBERS ON THE ENGINE. THANKS!



[Log in to Reply]  [No Email]
buickanddeere

01-26-2004 17:24:37




Report to Moderator
 Re: Re: Re: 420u??? in reply to BRANDON, 01-26-2004 15:46:37  
Sounds like a 1957 between serial # 108922 and 125,000. Maybe able to narrow it down farther by picking out minor running changes in a parts book. I was thinking of the 435 having the number stamped in the block back behind the blower. The gassers are at the front. The one set screw starter can tell at a glance if it was a 56 420 four speed with an added yellow stripe or an early 57 four speed.

[Log in to Reply]  [No Email]
Brandon (a different one!

01-25-2004 19:33:00




Report to Moderator
 Re: 420u??? in reply to Brandon, 01-25-2004 18:12:50  
Hello Brandon,

Since it has a round tube front, you probably have a 420 Utility, or possibly a 420 Standard.

The 420W (row crop utility) or 420I (industrial) used square front axles.

If the tractor was in yellow paint, that means it was most likely used by a county to mow grass or plow snow, or who knows what.

Here is a picture of a yellow 420U:

The Standard 420 would "stand" a bit taller than the utility. Compare this picture to your tractor to see what you've got.

I have a small webpage about the industrial 420s here

I'm pretty sure there is a separate engine serial number for your 420 that you MIGHT be able to backtrack through the records to get the tractor serial number. I can't remember where it is stamped though.

Good luck!
Brandon K.

My Industrial John Deere website
John Deere Diesels
The LaGrange Engine Club

[Log in to Reply]  [No Email]
BRANDON

01-26-2004 15:50:01




Report to Moderator
 Re: Re: 420u??? in reply to Brandon (a different one!, 01-25-2004 19:33:00  
FROM WHAT I CAN TELL THE PICTURE LOOKS A LOT LIKE MINE. THANKS!



[Log in to Reply]  [No Email]
andy from Il.

01-25-2004 18:18:58




Report to Moderator
 Re: 420u??? in reply to Brandon, 01-25-2004 18:12:50  
I think you may find that you have an old state tractor or industrail version



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy