Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

E-S CD Mag--Another question

Welcome Guest, Log in or Register
Author 
DL61

03-25-2004 06:57:11




Report to Moderator

I got the mag put together correctly, and she throws sparks like she should.(Thanks for all your help) Went to try it out on my '44B and found that the impulse cup is too deep to allow it to fit onto the governor housing. Tried it on an early styled A with the same results. I know that there is a long lug and short lug impulse cup, but haven't ever ran up against this. The lugs fit right into the coupler on the governor, but the impulse cup is sticking out so much, that there is a space between the mag and the governor after the lugs have bottomed out. Being that this is an older mag, would it be for a GP or a D?? Do these tractors have a deeper "well" in the governor housing to accomodate the taller impulse cup? If one could be found, can one trade out cups to allow it to fit onto an early styled A or B? Will probably buy Wico mag and try to sell this one.

[Log in to Reply]   [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy