 Greg, first you have to find a server on the internet to put your picture on.. That is a must as your picture MUST be on the internet somewhere so you can link to it.. There are a few free ones out there but they come & go so fast or start charging that the pictures could soon become dead links.. ~I put a lot of my pictures on my ISP server.. Most ISP companies [that's the company you pay every month to get access to the internet] have some free FTP space available for their customers to put things on [give yours a call].. ~You can also use a site like this site's "help identify" >Link ~OR>Link "parts & pieces" >Link ~OK,>Link lets assume you found a place to put your picture on the internet.. Once you have it on the internet somewhere all you have to do is open the picture, then right click on it [right in the center of the picture], then go to properties, then highlight the address URL & copy that to your clip board [that's where it's stored when you copy it],, ~Lets use dan_41jdh H platform post as an example... He just put that on the "Parts & Pieces" site a while ago.. SO, we go over to the YT tractor Parts & Pieces site & find his picture of the H platform... Then we open the picture,, then we right click on it,, then left click on properties,, we then copy the address URL which is>Link ~I will look for a picture of the fuel lines for an early styled A. I took a quick look & didn't find any but I am on my home computer & the shop computer isn't booted at this moment so I can't access that at the moment.. [email protected]
|