Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Corn Yields

Welcome Guest, Log in or Register
Author 
Kevin

10-09-2003 16:59:29




Report to Moderator

In central IL. corn yields in 200 to 225 range how about anyone else?




[Log in to Reply]   [No Email]
G/MAN

05-15-2006 07:40:57




Report to Moderator
 Re: 4020 camshaft replacement in reply to Joe5020, 05-14-2006 06:59:54  
I wouldn't even think about putting a used camshaft in there, if that's what you're contemplating. It's a long way into that camshaft if you have problems. And if you're already going with new, get the right one for that engine and bypass any "good deal" on an earlier camshaft. The cam runs around $400 from Deere, and new lifters (once again - don't even think about running old lifters on a new camshaft) are around $11 a piece. You might be able to find "will-fit" parts from various sources for less money, also.

[Log in to Reply]  [No Email]
barnrat

05-15-2006 07:49:26




Report to Moderator
 Re: Western NY 2 Cyl Club Spring Plow Day (photos) in reply to Bob M, 05-15-2006 06:14:55  
Nice photos. Makes me wanna load up the 830 and drive east to do a little plowing.



[Log in to Reply]  [No Email]
MIKE HANLEY

10-09-2003 20:54:11




Report to Moderator
 Re: Corn Yields in reply to Kevin, 10-09-2003 16:59:29  
Offical ave yields in our area are 35 for beans and 120 for corn. County agent was on TV this week stating bean yields have been reported to him from zero to 40 Bus and NOW GET THIS!!!!! He said because most of the bad corn went into the silo (without ears) the corn standing for grain should come in not as bad as expected. So the guy that put his whole crop into the silo because it wouldn't make grain will not be counted the this years ave yields. The 1st of Sept the corn fields looked like it was the end of Nov. Guys are wondering about nitrate poisionings in the silage corn. The dealers are selling the silo bags but not combines. We went from the 4th of July to Oct 4th at our place without any rain. Our 2nd cutting hay didn't cover fuel costs. I bought all the guy's next door year old hay in big round bales. See alot of semi's with hay from out west at the scales in town. There are guys around here trying to make it on $11.50 milk. Wonder how many will be here next spring. MONROE, LaCROSSE and VERNON counties Wisconsin

[Log in to Reply]  [No Email]
jubilee johnny

05-16-2006 07:19:22




Report to Moderator
 Re: jd 200 series cultivator restoration question in reply to Mike M, 05-16-2006 06:54:27  
When I was at a Cracker Barrel resturante recently I saw a large print of the man, boy, and tractor with cultivator. I am ready to start blasting mine and want it to look like the picture. I'm going red!!



[Log in to Reply]  [No Email]
Matt - how about bean yie

10-09-2003 20:08:59




Report to Moderator
 Re: Corn Yields in reply to Kevin, 10-09-2003 16:59:29  
Boy, you better say your prayers about them yields....that is pretty darm good....In Northern Ohio, beans are only doing 35-45 bushels per acre....was dry for 40 days...



[Log in to Reply]  [No Email]
Mike M

05-15-2006 11:42:58




Report to Moderator
 Re: 4020 camshaft replacement in reply to G/MAN, 05-15-2006 07:40:57  
I agree spend a little now and save alot later.

Think of it as protecting your investment. Afterall money spent on 4020's is a good investment not like throwing it away on other things we tend to buy.



[Log in to Reply]  [No Email]
STEVE

10-09-2003 20:00:48




Report to Moderator
 Re: Corn Yields in reply to Kevin, 10-09-2003 16:59:29  
Our yeild monitor is any where from 200 to 10 bushels to the acre.The moisture is 14 to 22% within 100ft.I feel very blessed just to have a crop this year



[Log in to Reply]  [No Email]
johndeereyellow

10-09-2003 19:25:30




Report to Moderator
 Re: Corn Yields in reply to Kevin, 10-09-2003 16:59:29  
Is that shelled or ear per acre.



[Log in to Reply]  [No Email]
Larry E

10-09-2003 19:58:45




Report to Moderator
 Re: Re: Corn Yields in reply to johndeereyellow, 10-09-2003 19:25:30  
In 1943 my dad won Colorado Dekalb corn growing contest with 142 bushel per acre.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy