Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Changes in the H

Welcome Guest, Log in or Register
Author 
J.P.

09-26-2003 08:11:54




Report to Moderator

Because Texas Gulf Coast weather is not always cooperative we had to resort to an old Ford 601 to get our second H out of the pasture yesterday. After considerable scrubbing and a couple of chemical baths we were finally able to read the serial number. Turns out that we have a '41 and a '44 to try to build one tractor. We are not sure yet which is "Peter" and which is "Paul". I know that there were changes made to the design of the H over the years it was produced; the question is does someone have a list of what changes were made and at what serial numbers were the changes implemented. This information would be helpful before we start our dissasembly and would be good documentation for our project book. Thanks, jp

[Log in to Reply]   [No Email]
dan_41jdh

09-26-2003 08:51:37




Report to Moderator
 Re: Changes in the H in reply to J.P., 09-26-2003 08:11:54  
J.P., I've developed a list of most of the significant changes to H's. Almost all changes to the H occurred in mid-year, so it's better to use serial numbers instead of model years when looking for features and details.

The first major change occurred at S/N 10000, when many things changed, including the main case, camshaft & clutch/belt pulley, shifter tower, etc.

The next major change occurred at S/N 27000, when provisions for electrics were made. Some of those changes include another main case change, radiator bottom tank, water pipes, crankcase breather, etc.

There were a lot of other less significant changes, and often parts affected by those types of changes are suitable for both older and newer models.

I only have a handwritten list of changes, and this is a work still in progress. If you want more information, send me an email.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy