Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Frank-in-Tallahassee (question)

Welcome Guest, Log in or Register
Author 
Fence

09-04-2003 13:17:18




Report to Moderator

This is an "off topic" question.
Tell me how you are able to add pictures to your message like you did in an earlier post.

Am I able to show a picture of a tractor on this message board?

Thanks,
Fence




[Log in to Reply]   [No Email]
F-I-T

09-04-2003 13:33:31




Report to Moderator
 Re: Frank-in-Tallahassee (question) in reply to Fence, 09-04-2003 13:17:18  
third party image

Fence:

It really easy !


First you need to have your photo on a server on the internet. If you don't have a personal webpage, you can upload it to the "Parts and Pieces" or the "Tractor Shed" section of this forum. Go to the photo and right click anywhere in the picture. Then click "properties". cursor down to the "Address (URL)" and hold the left button down as you sweep across the address to highlight it. Then right button and click "Copy". Now the address of the photo is on your clipboard.

Then you'll write you message here, and down below the message box where it says "Optional Image URL:, you'll paste that picture address there.

Here's a picture of my 70D that is in the "Tractor Shed". If you right click on the picture, you'll be able to see under "Properties" as to where the picture resides.

HTH

Frank-in-Tallahassee
70D // 855 // VAC

[Log in to Reply]  [No Email]
Fence

09-04-2003 14:29:57




Report to Moderator
 Re: Re: Frank-in-Tallahassee (question) in reply to F-I-T, 09-04-2003 13:33:31  
Ok! I see what you mean, now! I have a way to display through a personal website, but it looks like it's just as easy to use the other site(s) for pictures.

Thanks,
Fence



[Log in to Reply]  [No Email]
Fence

09-04-2003 14:45:16




Report to Moderator
 Re: Re: Re: Frank-in-Tallahassee (question) in reply to Fence, 09-04-2003 14:29:57  
third party image

Frank - first of all let me say that you sure do have good looking tractors! I am just starting out on John Deere tractor buying. So, it goes without saying that I don't know a lot about what to buy and the pricing, etc.

I have attached a picture of a 1010R that a lady in East Texas wants to sell for $1000. The only thing that I can tell is wrong with the tractor is that the steering is backwards?? I know that doesn't make any sense, but when you turn the steering wheel one way it goes the other. One of the fellas on the board suggested that it might be the hoses connected backwards. I am just not sure what the tractor is worth.

Thanks again for the help on uploading pictures.

Again, you sure have some good looking tractors!

Fence

[Log in to Reply]  [No Email]
68rs327

05-31-2006 17:47:59




Report to Moderator
 Re: Re: Re: Re: Frank-in-Tallahassee (question) in reply to Fence, 09-04-2003 14:45:16  
Frank, Only 1492 of the 1010R's were ever made. I think this would put the 1010R version in one of JD's most rare. I am trying to find out as much info. on the 1010's as I can. JD wrote and told me about there only being 1492 of the 1010R's being made. I also have been reading that only 10 of the 1010R versions were made in 1964-1965. If anyone has any information on the 1010R's they would like to share. Email me at [email protected] I would like to read as much info as I can. Thanks.

[Log in to Reply]  [No Email]
TommyT

09-04-2003 20:48:04




Report to Moderator
 Re: Re: Re: Re: Frank-in-Tallahassee (question) in reply to Fence, 09-04-2003 14:45:16  
Fence, I see the problem. The tires are on backwards.



[Log in to Reply]  [No Email]
Gonnerman - MO

09-06-2003 14:26:56




Report to Moderator
 Re: Re: Re: Re: Re: Frank-in-Tallahassee (question in reply to TommyT, 09-04-2003 20:48:04  
From the two clues, steers backwards and tires mounted backwards, I'd guess that this tractor was used on a mounted cotton picker. You might find that the gears are "backwards" too.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy