Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Does a M1186T weight fit an M or a 40S ?

Welcome Guest, Log in or Register
Author 
jCarroll

09-02-2003 10:51:00




Report to Moderator

My 40 Parts book does not show this weight, but it does not show the front wheel weight for the 40S either.

Which tractor does the M1186T belong to?




[Log in to Reply]   [No Email]
37D

09-02-2003 14:06:38




Report to Moderator
 Re: Does a M1186T weight fit an M or a 40S ? in reply to jCarroll, 09-02-2003 10:51:00  
My parts book shows #M168T as the front wheel Wt for an "M". For the "40s" it shows weights bolted to the front casting below the grill. Hope this helps.



[Log in to Reply]  [No Email]
tom

09-02-2003 13:24:14




Report to Moderator
 Re: Does a M1186T weight fit an M or a 40S ? in reply to jCarroll, 09-02-2003 10:51:00  
No part number like that in the M series catalog...sorry.



[Log in to Reply]  [No Email]
andrew klerk

09-02-2003 12:44:59




Report to Moderator
 Re: Does a M1186T weight fit an M or a 40S ? in reply to jCarroll, 09-02-2003 10:51:00  
j I have a set of weights that came on our 420 that i have also used on our mt and the 2 small weights on our m. I have also seen all three weighs on a neighbors 40t. Hope that helps some.



[Log in to Reply]  [No Email]
Wayne in Tn.

09-02-2003 12:58:32




Report to Moderator
 Re: Re: Does a M1186T weight fit an M or a 40S ? in reply to andrew klerk, 09-02-2003 12:44:59  
J. Carroll, There were no front wheel weights offered for the 40-420-430. There is no listing in the parts books for these models. However the front wheel weights for an M and MT will fit on these models. I remember as a kid, my grandpa had a set of the MT weights on our 40. I would guess the number M1186T is an M or MT number, I don't have a parts book for them.



[Log in to Reply]  [No Email]
jCarroll

09-02-2003 19:41:12




Report to Moderator
 Re: Re: Re: Does a M1186T weight fit an M or a 40S in reply to Wayne in Tn., 09-02-2003 12:58:32  
No front wheel weights for the 40 series ..... ... that's what I used to think - until about 2 years ago there was an article (think it was GM) about the 40 series which stated "no front wheel weights were necessary", and there was a photo of a 40S with front wheel weights. So, i wrote to Mr. Thinker - believing I had them in a mistake. he replied that wheel weights were available in an accessories catalog, and not listed in the big Parts Catalog.

Not sure what to believe..... .

[Log in to Reply]  [No Email]
Wayne in Tn.

09-03-2003 06:46:51




Report to Moderator
 Re: Re: Re: Re: Does a M1186T weight fit an M or a in reply to jCarroll, 09-02-2003 19:41:12  
That could be correct, I have never seen an accessories catalog. I would like to have one, wonder what the number is for it?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy