Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

435 wheel and tire size

Welcome Guest, Log in or Register
Author 
William Peets

01-18-2004 05:56:10




Report to Moderator

I was reading through archives on 435's and tire size caught my eye. Dec. 27,03 Denny Foster stated 36" tires on a 435 direct from factory. Don't know how to contact Denny to verify. Maybe someone out there could help. My wife and I pull 435's in the antique class and they must be stock. We are allowed to increase by two tire widths. We now use 14.9 X 28's and would like to go to a higher wheel. I have heard of 34" on the high crop but to narrow for our application. 36" have many more popular sizes to choose from but to my knowledge would not be stock. Can anyone help.

[Log in to Reply]   [No Email]
William Peets

01-18-2004 19:00:03




Report to Moderator
 Re: 435 wheel and tire size in reply to William Peets, 01-18-2004 05:56:10  
Jack B looking for a proof meter for a 435. Ours do not have any at least I can't find it. Where would I look. I would be most happy to send you pictures. We have two fully restored which we use at the tractor pulls and one in the works. They all have fresh engines thats a +. 2 have N 21 to 1 engines and one has a N 18.3 to 1. All with float ride seats and two with power stearing. We have 435 tractor fever and can't shake it.

[Log in to Reply]  [No Email]
buickanddeere

01-18-2004 22:40:09




Report to Moderator
 Re: Re: 435 wheel and tire size in reply to William Peets, 01-18-2004 19:00:03  
Had a real good howl on mine tonight blowing snow. Took the 16.9x30 long bar short bars off and put the shorter "Astro" brand 13.6x28 deep lug tires on. Don't know who made them but "Co-op brand looked the exact same too. Tractor looks like it lost 1/3 it's size. The rpms will go to 2800 from the stock 1850 at pto. Hurled the snow far enough away not to drift back in. Hydraulics could barely pickup the big old blower. Had to use both sides of the dual rockshaft.

[Log in to Reply]  [No Email]
Jack B.

01-18-2004 18:26:53




Report to Moderator
 Re: 435 wheel and tire size in reply to William Peets, 01-18-2004 05:56:10  
I was reading your post about your 435 and was wondering if any of you might have a proof meter for a 435. Thanks JackB.



[Log in to Reply]  [No Email]
Leger

01-18-2004 18:08:53




Report to Moderator
 Re: 435 wheel and tire size in reply to William Peets, 01-18-2004 05:56:10  
Go to Detroit Diesel dealer and get N type parts for your engine, you can also put larger injectors, ask them what else can be done for more horsepower.



[Log in to Reply]  [No Email]
william Peets

01-18-2004 17:51:29




Report to Moderator
 Re: 435 wheel and tire size in reply to William Peets, 01-18-2004 05:56:10  
Thanks for the information but one more question. That 14.9X34,60.2" high Titan sounds kind of good. What about wheels any idea where to purchase them. We use Firestone 14.9X28 on two of the tractors. I am restoring and the engine is being rebuilt on another 435 which belongs to my wife she is hoping for 50+ hp but the engine builder says he can only get what the engine will put out and stay legal, sounds logical to me. We are staying legal. A higher tire and wheel may give her the advantage she is looking for and she would still be legal.

[Log in to Reply]  [No Email]
Leger

01-18-2004 17:40:59




Report to Moderator
 Re: 435 wheel and tire size in reply to William Peets, 01-18-2004 05:56:10  
I have a 435 original with 14.9 36 r2 rear and 7.50 15 front-- south Louisiana tractor, rice? They are the original tires!!!



[Log in to Reply]  [No Email]
William Peets

01-18-2004 18:27:43




Report to Moderator
 Re: Re: 435 wheel and tire size in reply to Leger, 01-18-2004 17:40:59  
Hi Leger: Glad you responded reguarding the 36" rears on your 435. Now how do I get the information that they are stock from the factory. Could you or anyone help me with this. I would need documation to show our club president. Maybe a book or magazine I could refer to. 36's are just not going to happen in our club without the proof and the burden will be my responsibility. My wife would love to be sitting on a set of 36" wheels and tires as long as they are on her 435.

[Log in to Reply]  [No Email]
MIKE HANLEY

01-18-2004 14:21:22




Report to Moderator
 Re: 435 wheel and tire size in reply to William Peets, 01-18-2004 05:56:10  
According to Dobb's book John Deere 30 series, even thought the 34" tire was an option, out of the 4,626 435's built, only 118 435's left the factory with the 34" tires.



[Log in to Reply]  [No Email]
buickanddeere

01-18-2004 08:52:15




Report to Moderator
 Re: 435 wheel and tire size in reply to William Peets, 01-18-2004 05:56:10  
Mother Deere just put two different tire sizes on the back of the "W" row crop utility tractors. The 12-28/13.6x28. And the 10-34/11.2x34 or the 12.4x34 depending who you ask. Goodyear in the radial section state both the 11.2x34 and 12.4x34 as the "new" size for the 10-34. As radials are not allowed and the only 1st up sizes of the 10-34 is the bias 14.9x34,60.2" tall Titan. Then the 2nd upsize is the bias 16.9x34 Titan and our favorite, the bias Firestone 23 degree 16.9x34,62.0" tall. I'm certain however someone is going to squawk " way oversize" before your full pull is completed. The 16.9x30's All Traction Field and Road Long Bar/Short bar on my 435 look awful big. The other set of Firestone 16.9x30 Traction Fields and roads around here, look to be two sizes smaller by comparison. With their rounded shoulders and short/narrow tread bars. Of course the double up size 16.9x28,57.0" tall can be had from Firestone. Surprising enough the little old hard to find bias 11.2x34 can be had from Titan tire.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy