Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Cultivator For JD 420

Welcome Guest, Log in or Register
Author 
Denny

08-17-2003 18:08:41




Report to Moderator

I recently bought some neighbor's stash of implements. While most were the McCormick-Deering I wanted there was also a cultivator off a 420 JD. I'm guessing a row crop because it mounts to the tractor. Anyone know the model? It has 2 rows with 4 teeth on each side. Is in good shape, but I have no need for it, so am going to sell it. Any help with some info would be appreciated. Thanks! Denny In Michigan.

[Log in to Reply]   [No Email]
jCarroll

08-19-2003 05:15:06




Report to Moderator
 Re: Cultivator For JD 420 in reply to Denny , 08-17-2003 18:08:41  
BTW, I have the tractor brackets from a 40W for cultivators - and no cultivatots.

So, I might be in the market for the cultivators - or I'm willing to sell the brackets to whomever buys your cultivato



[Log in to Reply]  [No Email]
Denny

08-19-2003 14:47:43




Report to Moderator
 Re: Re: Cultivator For JD 420 in reply to jCarroll, 08-19-2003 05:15:06  
JC. I have 2 arms for cutivator. Don't know what else it takes to hook it up. I'm IH guy so if you want it for 200.00 call me. Cell #231-437-0105. Denny In Michigan.



[Log in to Reply]  [No Email]
MIKE HANLEY

08-17-2003 20:38:00




Report to Moderator
 Re: Cultivator For JD 420 in reply to Denny , 08-17-2003 18:08:41  
My books show a model 4200 for the tricycle 420 and a model 4220 for the wide front tractors. Differance beening is in how the mounting brackets are so as to claer the wide front when driving into it when mounting.. The back gangs look the same. Interesting thing I forgot about, until I looked now in the books again, They also list a 4250 3 Pt rear mount, that for the 430 and 1010, 2010 they called an RB-2. Idenical to the 4250.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy