Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

70D: Generator/VR problem...Solved

Welcome Guest, Log in or Register
Author 
F-I-T

08-06-2003 13:08:29




Report to Moderator

Well, I replaced the ammeter, though it might have just been a poor connection. The old ammeter checks fine on the bench, but I had the new one, so I'll save this old one for another day.

After all the trouble shooting steps were followed, it didn't point to anything other than a bad current sensing side in the VR. The points really did not look bad, and the continuity checks that I could make seemed all right. I think it could be something like a poor rivet to bottom plate bond, and I'd have trouble reproducing that one.

So, one fairly cheap regulator later, it is charging fine, and keeps up with all three lights.

We'll see how long this one works.

Thanks to all. I do have a bad fuel gauge. One of the coils is shot in that, so I'll start looking for a replacement.

If anyone has any old fuel gauges that are burned out, I'd be interested in obtaining a few to do some testing/rewinding on. Just send me an e-mail.


Frank-in-Tallahassee
70D // 855

[Log in to Reply]   [No Email]
STU

08-07-2003 08:07:24




Report to Moderator
 Re: 70D: Generator/VR problem...Solved in reply to F-I-T, 08-06-2003 13:08:29  
FIT

My 720D is in need of coils and condensors. I have found coils at Taylor Equipment, they have them ready on the shelf. Check on p.52 in the most recent 2 cylinder for their add or call 1 800 368 3276. They also have condensors and points. Good prices, nice fellows.



[Log in to Reply]  [No Email]
F-I-T

08-07-2003 08:45:51




Report to Moderator
 Re: Re: 70D: Generator/VR problem...Solved in reply to STU, 08-07-2003 08:07:24  
Stu:

I got my last pony ignition coils from Taylor. I agree nice folks. I was speaking about the two little coils that located inside of the fuel gauge. I don't think anyone sells those. :(

F-I-T



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy