Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

D Plugs

Welcome Guest, Log in or Register
Author 
Darald Marin

08-01-2003 21:56:56




Report to Moderator

My 48 Model D is to be used at a threshing demo later this fall and the last time up on the threshing machine the plugs fouled and I was embarassed. Had to hook up the 15-30. What plugs should I use to eliminate this problem. I have been having lots of trouble with Champions, which the D has, less trouble with AC's in other two cylinders. Thanks.




[Log in to Reply]   [No Email]
Bob-Wyo

08-04-2003 11:19:17




Report to Moderator
 Re: D Plugs in reply to Darald Marin, 08-01-2003 21:56:56  
Darald 3077 Autolite's for sure, never have had a problem with them, now the 3076 Autolite is a different story, the last 2 I tried and cost me are in the far corner of the pull parking lot.
3077 are a little hotter and have the deeper reach.
Bob



[Log in to Reply]  [No Email]
Tractorboy

08-02-2003 18:37:26




Report to Moderator
 Re: D Plugs in reply to Darald Marin, 08-01-2003 21:56:56  
I have a friend who has a B Unstyled and he was having trouble with plugs too so he tried Blue Crown and says he wont use no other now . Do any of yall know the # of Blue Crown plugs for these old Deeres .



[Log in to Reply]  [No Email]
Leroy

08-02-2003 18:29:28




Report to Moderator
 Re: D Plugs in reply to Darald Marin, 08-01-2003 21:56:56  
Local parts store: owner was service manager for Deere dealer that went out of business: noes not recemond either Champion or A C, will sell them but recomends Autolite, not only for Deere but any engine



[Log in to Reply]  [No Email]
rex from ky

08-02-2003 18:16:53




Report to Moderator
 Re: D Plugs in reply to Darald Marin, 08-01-2003 21:56:56  
I ran into the same problem with a 52 model "A" and cured my problem with ac plugs and hi-test gas. also make sure you use copper core wires.



[Log in to Reply]  [No Email]
Ron Weber

08-02-2003 16:42:00




Report to Moderator
 Re: D Plugs in reply to Darald Marin, 08-01-2003 21:56:56  
It seems both the john deere guys and IHC guys are having the same problem. The answer is how the nowadays plugs are made. For years, the ceramic insulator has been covered with glazed, both above an below. In reducing costs, the plug manufactures now just glaze the top of the ceramic and skip the bottom, leaving it porous. This make work in modern engines, with higher compression, better carbs (or fuel injection), and pollution controls; but in our older tractors, it spells fouling. I have had brand new champions put into my farmall f-12 and after four hours running time, the tractor starts to miss. On the same tractor, I found some new old stock champions and they are still in there after three years. I am currently experimenting by making plug adapters so that I can try out using cheaper J8C (14mm) that ususally don't foul out in our lawn mowers. I'll let you all know when I get my results. Ron

[Log in to Reply]  [No Email]
GaryW

08-02-2003 15:01:21




Report to Moderator
 Re: D Plugs in reply to Darald Marin, 08-01-2003 21:56:56  
The AC's work very well on my A. I'm not sold on autolites like a lot of people on this board. I have had problems with the autolite 386.



[Log in to Reply]  [No Email]
Bob-Wyo

08-04-2003 14:27:51




Report to Moderator
 Re: Re: D Plugs in reply to GaryW, 08-02-2003 15:01:21  
Gary W next time try the Autolite 388's, i've sure cured a lot of A, B,G, 60'S, they are a little hotter plug than the 386.
Just a thought, but glad the AC's are working for you.
Bob



[Log in to Reply]  [No Email]
John T

08-02-2003 07:16:08




Report to Moderator
 Re: D Plugs in reply to Darald Marin, 08-01-2003 21:56:56  
Darald, as pointed out below, a heat range or 2 higher plug(s) is a good place to start (I have best luck with Autolite), plus trying to keep the operatign temp up can help in plug fouling prevention. However, its also important that your ignition is in tip top shape meaning correct timing,,,,,proper gapping and replacing the points if burned or pitted or carboned up bad,,,,, ,,,, and be sure the cap and rotor is clean and free of residue, carbon tracks or any cracks,,,,, ,,,, plus use good solid wire core NOT carbon auto suppressor type plug wires.

Some use an extra washer on the plug to raise its operatign temperature and run the carbs load and idle needle settings a bit on the lean (screwed in) side, so theres no black smoke (running too rich) coming out the stack which quickly leaves a flat black sooty plug coatign on the plugs fouling them.

Best Wishes, hope this helps, post back any more questions, but Im not actually much of a "D" man.

John T Nordhoff in Indiana

[Log in to Reply]  [No Email]
Dave in Ohio

08-02-2003 02:22:03




Report to Moderator
 Re: D Plugs in reply to Darald Marin, 08-01-2003 21:56:56  
I have had good luck with AC C-88-L and Autolite 388's The secret is more in the tractor temp than plugs, however I have never had good luck with Champions. Close the shutters when you start and adjust to keep the operating 175 to 190 degrees. I had a set of plugs foul out in a parade the other day and an 8-N Ford offered to pull me. Thank God I made it to the end.



[Log in to Reply]  [No Email]
Van

08-05-2003 22:34:40




Report to Moderator
 Re: Re: D Plugs in reply to Dave in Ohio, 08-02-2003 02:22:03  
No need to worry dave, that 8N ford couldnt pull the hat off your head



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy