Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

dual wheels on 620

Welcome Guest, Log in or Register
Author 
jim

07-23-2003 14:42:18




Report to Moderator

anyone ever put dual wheels on a 620?? i have a row crop with the long axles, what will i need??




[Log in to Reply]   [No Email]
MIKE HANLEY

07-23-2003 22:28:14




Report to Moderator
 Re: dual wheels on 620 in reply to jim, 07-23-2003 14:42:18  
I had a set of duels on on 620 back in the late 60's when we were on the flat and had wet ground. They were the direct hub to axel mount style. I recall that when we got stuck with the duels, WE WERE STUCK!!!! The guy next door couln't get me out with a 4020 and we had to get a wreaker. We got the 4020 stuck on purposes then chained the wreaker to the 4020 and then the wreaker cable to the 620 with two block and tackel set ups chained to the rear axels and the drawbar and pulled it out backwards. After we got out the 620, we then got out the 4020. I still may have the duels but last time I looked the tires were rotted off the rims. Had a set of duels on the 730 the first year we were here but soon found out we needed weigth on the tires for our greasy clay hills rather then floatation. The duels out back maybe the ones I had on the 620 or maybe they are for the 730. Can't remember, it's been 30 years since I used them. I was going to send you a picture of the duels on the 620, but you didn't give your E-mail address.

[Log in to Reply]  [No Email]
CMB

07-23-2003 20:58:05




Report to Moderator
 Re: dual wheels on 620 in reply to jim, 07-23-2003 14:42:18  
Had a neighbor with a 630 with duals back in the early 60's, but I think they were clamp ons. Saw a late "A" at a show last week that had two complete sets of cast iron rears, the outside pair was of course installed inside out.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy