TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

JD A power-lift pump gasket...

Welcome Guest, Log in or Register

Author

chris in wi

06-09-2003 00:38:42

Report to Moderator

After further review, I've decided to shun the plain bull-gear cover and re-attach the power-lift. I'll paint it later if the mood strikes me. My question is this:

The two-gear pump which is driven by the PTO shaft and supplies oil to the rock-shaft cylinder does not show a gasket between the pump housing and the power-lift assemble in the parts book. For that matter, the parts book doesn't even show a gasket between the pump cover and the pump body!

What gives? If I haven't got a part number, the implement dealer won't even talk to me. (Even with a part number, I sometimes get the impression he's not to pleased to see me!)

There is, of course, some sort of gasket here, but what is it? And since it's under pressure, what should I make it out of, since I doubt I'll be able to buy one?

chris

[Log in to Reply] [No Email]

Clooney

06-09-2003 03:15:48

Report to Moderator

Re: JD A power-lift pump gasket... in reply to chris in wi, 06-09-2003 00:38:42

Chris, you're correct there isn't a gasket listed for that area. It doesn't use a gasket.
~Those pump halves were sealed with shellac as original. You can use either shellac or any thin bodied gasket sealer. I usually use Loc-Tite 518 but it is pretty thick for that area so a REAL THIN coat must be applied. Lately I have been using some 2 part urethane clear to seal those pumps & diesel transfer pumps & so far it has been working good.

[Log in to Reply] [No Email]

06-09-2003 07:43:35

Report to Moderator

Re: Re: JD A power-lift pump gasket... in reply to Clooney, 06-09-2003 03:15:48

Here in Central Minnesota the auto parts places and hardware stores usually have "gasket shellac" in stock. I think it's usually Permatex brand. It comes in a small 2 ounce or so plastic bottle with applicator brush built onto the cap.

[Log in to Reply] [No Email]

chris in wi

06-09-2003 10:17:50

Report to Moderator

Re: Re: Re: JD A power-lift pump gasket... in reply to C, 06-09-2003 07:43:35

I'll be damned!

Learn something new every day!

Now why didn't the parts guy at the Deere dealer know that?

Chris

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy