Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Baker valve, value and rebuild info?

Welcome Guest, Log in or Register
Author 
smoky

05-20-2003 15:42:32




Report to Moderator

I have located a baker valve still mounted on what appears to be about a 46 A or B in a tractor junk/parts yard. The tractor is pretty well picked over-not much left. It looks like it has been sitting for the last 20 years. The control arm on the Baker valve still moves freely and all the outlets are capped. What is it worth? what should I offer for it? And, - reading archives-it appears someone out there had info for repair-setup and use of this item. HELP Please

[Log in to Reply]   [No Email]
Craig-MN

05-20-2003 23:38:25




Report to Moderator
 Re: Baker valve, value and rebuild info? in reply to smoky, 05-20-2003 15:42:32  
A value will depend on condition and if all the parts are there. I found a really nice one (the guy had two of them) at a swap meet 2 or 3 years ago. I don't remember what I paid, I know it was not over $50, probably $40, for the nice one that included the special bolt adaptors and a few other parts that fall out when you remove it from the tractor. His other one did not have all the parts and had a broken/welded part inside of it.

I have poor scans of the instructions. I need to contact the guy who has the originals and try to get better scans.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy