Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

B that wouldn't start now runs.

Welcome Guest, Log in or Register
Author 
Daniel Chestnut

01-10-2004 21:46:52




Report to Moderator

I had a little time to work on my B that wouldn't start Monday. I squirted some oil into the cylinders, put in new Autolite 386s, and checked the air cleaner bowl to see if it had any water in it, which it didn't. After doing this, I was able to get it to pop, but it never would take off. Then I took the carb off for a second time and cleaned it again. This time I found another gas line that I didn't see the first time. Naturally, it was the one that was full of stuff. Once I put it back together and back on the B, it started right up. I let it run for approximately an hour, since it has been at least ten years since it ran good. I just happed to have my cell phone, so I called my grandfather so he could hear it run. He was really excited to hear that I had it running. On Saturday afternoon, I got the B out. It started right up. First time it moved out of the shed under its own power. First thing I did was drove it up to my grandparents house and parked it right beside my grandfathers window, so he could hear it running. He was really glad to hear it. I had it running for an hour and a half, drove it around, before it put it back in the shed. Eventually, I want to put shutters off of another B on this one, decide wether or not to leave the fenders from an earlier A on it, and put the 3 point hitch on it, if I can figure out how it goes on. I'd like to thank everyone that gave me tips and ideas to get it running. If it wasn't for you, it probably still wouldn't be running.

[Log in to Reply]   [No Email]
Chris

01-10-2004 22:11:27




Report to Moderator
 Re: B that wouldn't start now runs. in reply to Daniel Chestnut, 01-10-2004 21:46:52  
Hey buddy! I knew you liked the green ones too! Glad to hear you have a popper and got it running. See you in class Monday.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy