Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Jd model 36 loader quiz

Welcome Guest, Log in or Register
Author 
darren

04-25-2003 23:37:13




Report to Moderator


Which JD tractor models was the JD model 36 loader designed to fit? I have found one that is for sale and would like to know if it's worth the effort to adapt it to a model 'A'?




[Log in to Reply]   [No Email]
MIKE HANLEY

04-26-2003 04:56:09




Report to Moderator
 Re: jd model 36 loader quiz in reply to darren, 04-25-2003 23:37:13  
No not as is. It was for the 1010 and 2010. It will not clear the flyweel and the pully. And it has 2 1/2" lift cylinders. A two banger should have a loader with a least 3" lift cylinders. Not saying that it can't be done. We have a 35 loader which is simular to the 36 on a 630, But it took a lots and lots of welding and cutting and we went to 4" lift cylinders.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy