Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum
:

Wheels for 435

Welcome Guest, Log in or Register
Author 
arnie

04-20-2003 18:53:00




Report to Moderator

Are the front wheels the same on all the 420, 430 and 435?? Mine are 16"

Thanks




[Log in to Reply]   [No Email]
G Taylor

04-21-2003 17:22:07




Report to Moderator
 Re: wheels for 435 in reply to arnie, 04-20-2003 18:53:00  
There were 15 and 16" rims used. The proper deere rims have clearance dents in the rims to access the valve stems easier. There were several different part numbers used. I'll look on the parts CD again when I get time. there was even a single wheel option that used a different rim than the wide and narrow fronts. A "W" chassis Dubuque is always driving uphill with 16" fronts and 12-28/13.6x28 rears. Barely level with 15" fronts and 10-34/11.2x34 or 12.4x34 rears.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy