Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

DLTX-18 carb on a 1947 B??

Welcome Guest, Log in or Register
Author 
Lynn Kasdorf

01-04-2004 19:40:35




Report to Moderator

According to the chart on robertscarbrepair.com, a DLTX-18 was for a JD model A, yet that is what is on my model B tractor. the 18 is not in the list of possible carbs for a B.

I've cleaned and bead blasted it, and is says DLTX-18 plain as day. It had the same level of grime as its surroundings and it showed no signs that it was not original, but you never know.

Will this carb work ok on my tractor? I reckon it will, because it was used for years. Would I be significantly better off with a different carb?

[Log in to Reply]   [No Email]
buickanddeere...carbs on

01-06-2004 08:07:46




Report to Moderator
 Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf, 01-04-2004 19:40:35  
B's 1000-95999 all fuel DLTX-10 B's 96000-200999 all fuel DLTX-34 B's 201000+ all fuel DLTX-73 & 50 stove oil burners from 5000001 - 5015950 B's 201000+ gasoline DLTX-67



[Log in to Reply]  [No Email]
Lynn Kasdorf

01-06-2004 07:29:11




Report to Moderator
 Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf, 01-04-2004 19:40:35  
Ok- it's official. I'm a BIG IDIOT.

I do in fact have a dltx67 after all. I looked closely at it again last night. What I had seen before was the large "DLT13" in the float vbowl, and misread it as 18 and added an "X" by the time I got to the computer.

So- I am all set, at least on the carb front. I wonder about my mind though...

Sorry for the distraction of my bonehead posting. Now back to our regularly scheduled discussion forum, already in progress...

[Log in to Reply]  [No Email]
ChuckW

01-05-2004 16:21:49




Report to Moderator
 Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf, 01-04-2004 19:40:35  
there is a dltx67 on ebay as we speak..... .



[Log in to Reply]  [No Email]
Jon

01-05-2004 09:58:36




Report to Moderator
 Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf, 01-04-2004 19:40:35  
I have three JD unstyled "B"'s with DLTX 18's. They run, but not very well even after re-building. I have to keep the choke on half way. I bought three DLTX 10's and anticipate that it should run better, since this is the proper carb. for the tractor. Its my feeling that if there was no difference, than why did M-S make different carbs for the A and the B. I don't know why there are so many DLTX 18 carbs on the old B's....maybe the 10's are more valuable and they got traded out before the tractor was sold?

[Log in to Reply]  [No Email]
ChuckW

01-05-2004 05:11:31




Report to Moderator
 Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf, 01-04-2004 19:40:35  
if you get it running you will be blowing a lot of unadjustable black smoke...a lot of folks just stuck some carb on if it would fit. This is your case...tractor will NEVER run properly unless you use the PROPER carburator. A lot of newby's always ask if it matters and if it didn't JOHN DEERE would never have made a different carb. Good luck...believe I've seen some of these recently on ebay.

[Log in to Reply]  [No Email]
Lynn Kasdorf - Leesburg,

01-05-2004 07:34:04




Report to Moderator
 Re: Re: DLTX-18 carb on a 1947 B?? in reply to ChuckW, 01-05-2004 05:11:31  
I understand that JD spec'ed a particular carb for the B that had particular characteristics.

However, I don't quite understand why you say that it will blow black smoke that is unadjustable. That would indicate a too-rich mixture. I can't believe that the 18 is that much different than the 67, that I couldn't lean it out to make it run basically ok.

Especially when I read about Roberts carb enlarging the venturi's of carbs to improve performance. Their enhanced carbs breathe better. I'll call them and see what they suggest.

How is this different than somebody taking the dinky 2 barrel carb of a V-8 and putting on a Holley 4 barrel?

I can't imagine that these old JD engines are all that critical. What am I missing here?

In any event, I think I'll rebuild this 18, and keep an eye out for a 67, then sell the 18. After all, the tractor ran for decades with this carb in place.

[Log in to Reply]  [No Email]
buickanddeere

01-05-2004 17:41:51




Report to Moderator
 Re: Re: Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf - Leesburg, , 01-05-2004 07:34:04  
A carb works by metering fuel at various rates depending on pressure. Pressure depends on flow/velocity across the throttle plate and venturi. A too large carb will not have enough flow through it at accurately meter fuel from the idle or main jet(s) as the pressure drops will be too low. Yes you can bore a venturi bigger and re-jet a carb IF the engine has been bored,stroked, ported and over reved. Now it will have near stock pressure drop across it again with the increased airflow. Pressure drop and minor flow restriction across the venturi of a carb is required for any carb to operate. The only way around it is fuel injection and measure air through a hot wire sensor or a MAT system. Well the old fuel injected 327's used vanes etc but we won't go there. In short, put the carb on the engine Mother Deere used. An "A's" carb on a stock B won't make an A's horsepower. A "G's" carb on a stock A won't make a G's HP either. Lots of people stumbbling around with 750 and 850 double pumpers on 350's as well unable to understand it would make more power with a vacuum secondary 450 or 600.

[Log in to Reply]  [No Email]
Lynn Kasdorf

01-05-2004 08:07:53




Report to Moderator
 Re: Re: Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf - Leesburg, , 01-05-2004 07:34:04  
I just spoke with Robert of robertscarbrepair.com. He said that I should be able to get the B running with this carb, but it won't be perfect.

Since I am basically trying to see what I have here, I'll rebuild the 18 and get the engine going if I can, while keeping an eye out for a 67. Heck, maybe the guy who sold me the tractor has the original carb kicking around in his junk pile somewhere...

[Log in to Reply]  [No Email]
John T

01-05-2004 09:06:00




Report to Moderator
 Re: Re: Re: Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf, 01-05-2004 08:07:53  
Lynn, I hear what youre saying, interesting thread. (Im an EE NOT an ME) I guess youre saying a carbs main job is to supply an atomized mixture of fuel and air in the appropriate 15 to 1 or so mixture ratio so youre not running too rich or lean, right????? Next, the carb has a certain maximum CFM flow capacity at which it can still continue to supply a mixture of fuel and air in the 15 to 1 ratio. When the throttle plate is opened more and then the engines intake CFM requirement is increased, the larger CFM capacity carb can continue to supply fuel and air in the 15 to 1 ratio. Makes sense to me also (i.e. why a larger CFM rated carb should still work as you suggest), but maybe there are other air flow dynamics and pressure drops across the venturi etc etc whereby the correct carb will still perform best????? ??

Great topic, hope some carb men can enlighten all of us as to why the correct JD size works best. I agree it probably does, just dont understand all the mechanics and physics going on here lol.

John T

[Log in to Reply]  [No Email]
parrothead

01-05-2004 20:24:43




Report to Moderator
 Re: Re: Re: Re: Re: DLTX-18 carb on a 1947 B?? in reply to John T, 01-05-2004 09:06:00  
John, Robert Beaver told me that a JD A could run using a Briggs & Statton carb if one was inclined to go to the trouble to mount it. He had a deep technical reason for this which really blew me away.



[Log in to Reply]  [No Email]
Duane Larson

01-04-2004 21:59:58




Report to Moderator
 Re: DLTX-18 carb on a 1947 B?? in reply to Lynn Kasdorf, 01-04-2004 19:40:35  
Lynn,
As I recall your B is > 201000, so the gas burning engine used a DLTX67 and the all-fuel version used a DLTX73. Assuming you have a gas burner, there are size differences in the venturi, throttle plate, nozzle, economizer system, etc. As you know, the 18 will bolt up, but the biggest problem must the operation of the choke, as the 18 came with a hand choke, and the 67 came with a newly designed spring loaded choke with a lever designed to attach to the choke lever. If your's has been changed somehow (it can't be done exactly correctly) you would at least have a functioning choke system.

Other than the above differences, and admonitions both from JD and MS about sizing the carb properties to the size of the engine (the 18 would be a bit oversized), fuel it burns, etc., it is hard to say what (if any) difference in operation the proper carb would make (ie, what you would notice).

Others will likely have other opinions.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy